ConnectCore™ 9C
- Hardware
- Network Interface
- Environmental
- LEDs
- Dimensions
- Conectors/Pinouts
- Power Requirements
- Regulatory Approvals
- Development Kit Features
Hardware
- 32-bit NS9360 high-performance RISC processor (155 MHz) w/MMU
- On-board memory
- 4/8 MB Flash and 16/32 MB RAM
- Up to 4 high-speed TTL serial ports
- Throughput up to 921 Kbps
- Full signal support
- Hardware/software flow control
- Up to 4 SPI ports
- Master data rate up to 8.35 Mbps
- Slave data rate up to 6.25 Mbps
- I2C v1.0 bus interface
- Fast (400 kHz) and normal (100 kHz) mode 3
- 7-bit and 10-bit address modes
- USB 2.0 Host/Device Interface
- Full speed (12 Mbps) and low speed (1.5 Mbps) support
- LCD controller
- Support for 18-bit active matrix TFT displays
- Up to SVGA (800x600) resolution
- Single/dual panel STN displays
- General purpose timers/counters/PWM
- Up to 8 independent 16-/32-bit programmable timers, counters, or 4 PWM functions
- 4 programmable external interrupts
- Up to 55 shared General Purpose Input/Output (GPIO) ports
- Up to 7 high-current (8 mA) pins
- Real-time clock
- Processor powered, no battery backup
Network Interface
- Standard: IEEE 802.3
- Physical Layer: 10/100Base-T
- Data rate: 10/100 Mbps (auto-sensing)
- Mode: Full or half duplex (auto-sensing)
- On-board connector: RJ-45 w/magnetics
- 802.3af power pass-through (mid-span and end-span
Environmental
- Operating temperature: -40º C to 85º C (-40º F to 185º F)
- Relative humidity: 5% to 95% (non-condensing)
- Altitude: 12,000 ft (3657.6 m)
LEDs
- Ethernet connector
- Link integrity
- Network activity
Dimensions
- ConnectCore 9C
- Length: 3.50 in (88.90 mm)
- Width: 2.10 in (53.34 mm)
- Height: 0.80 in (20.32 mm) with RJ-45 Ethernet connector
Connectors/Pinouts
- SO-DIMM 144-position socket main signal connector
- AMP 390112-1 or equivalent
- Suitable for manual and machine placement
- On-board JTAG connector
- See Hardware Reference Manual for complete connector and pinout information
Power Requirements
- Module: 3.3VDC @450 mA max
- USB interface: 5VDC @500 mA max per port (optional)
Regulatory Approvals
- FCC, Part 15 Class B
- EN55022, Class B
- EN61000-3-2 and EN61000-3-3
- ICES-003, Class B
- VCCI, Class II
- AS 3548
- FCC Part 15 Subpart C Section 15.247
- IC (Industry Canada) RSS-210 Issue 5 Section 6.2.2(o)
- EN300 328
- EN301 489-3
- UL 60950-1
- EN60950 (European Union)
- CSA C22.2, No. 60950
- EN55024
Development Kit Features
- Microcross™ GNU X-Tools
- Documentation
- Hardware Reference Manual
- Programmer’s Guide
- API Reference
- Advanced Web Server Toolkit
- Sample code
- Driver source code
- Serial, Ethernet, I2C, SPI, USB, LCD
- Digi Connect module w/JTAG
- Development board
- Macgraigor Raven JTAG debugger or gdb software debugger
- ThreadX Real-Time Operating System with picokernel™ architecture
- Requires less than 25 Kb code space
- Fusion™ TCP/IP stack with full networking protocol and extended network services support
- Universal IP address assignment through Address Configuration Executive (ACE)
- Network discovery services
- ADDP, LDAPv3
- Allegro Software Embedded Web Server
- SSL 3.0/TLS 1.0 with strong encryption
- DES, 3DES, AES (NIST certified)
- Flexible and robust file system supporting RAM and Flash
- SMICng SNMP MIB compiler
- Micro XML SAX parser
- Additional utilities
- HTML-to-C compiler
- Flash download