Nous contacter: PhoneTéléphone EmailEmail

ConnectCore™ Wi-9C


Hardware

  • 32-bit NS9360 high-performance RISC processor (155 MHz) w/MMU
  • On-board memory
    • Up to 256 MB Flash and 256 MB SDRAM
  • Up to 4 high-speed TTL serial ports
    • Throughput up to 921 Kbps
    • Full signal support
    • Hardware/software flow control
  • Up to 4 SPI ports
    • Master data rate up to 8.35 Mbps
    • Slave data rate up to 6.25 Mbps
  • I2C v1.0 bus interface
    • Fast (400 kHz) and normal (100 kHz) mode
    • 7-bit and 10-bit address modes
  • USB 2.0 Host/Device Interface
    • Full speed (12 Mbps) and low speed (1.5 Mbps) support
  • LCD controller
    • Support for 18-bit active matrix TFT displays
    • Up to SVGA (800x600) resolution
    • Single/dual panel STN displays
  • General purpose timers/counters/PWM
    • Up to 8 independent 16-/32-bit programmable timers, counters, or 4 PWM functions
  • 4 programmable external interrupts
  • Up to 55 shared General Purpose Input/Output (GPIO) ports
    • Up to 7 high-current (8 mA) pins
  • Real-time clock
    • Processor powered, no battery backup

802.11b/g Wireless Network Interface

  • Standard: IEEE 802.11b/g
  • Frequency: 2.4 GHz
  • Data rate: Up to 54 Mbps w/fallback
  • Modulation: DBPSK (1 Mbps), DQPSK (2 Mbps), CCK (11,5.5 Mbps), BPSK (6,9 Mbps), QPSK (12,18 Mbps), 16-QAM (24,36 Mbps), 64-QAM (48, 54 Mbps)
  • Transmit power: 16 dBm typical
  • Receive sensitivity: -73 dBm @54 Mbps
  • Connector: 1 x RP-SMA or 2 x U.FL

Wired Network Interface

  • Standard: IEEE 802.3
  • Physical Layer: 10/100Base-T
  • Data rate: 10/100 Mbps (auto-sensing)
  • Mode: Full or half duplex (auto-sensing)
  • On-board connector: RJ-45 w/magnetics
  • 802.3af power pass-through (mid-span and end-span)

Environmental

  • Operating temperature: -30º C to 75º C (-22º F to 167º F)
  • Relative humidity: 5% to 95% (non-condensing)
  • Altitude: 12,000 ft (3657.6 m)

LEDs

  • Ethernet connector
    • Link integrity
    • Network activity
  • On-board
    • 2 x user-definable (default: wireless link, wireless activity)

Dimensions

  • Length: 3.055 in (7.76 cm)
  • Width: 3.590 in (9.12 cm)
  • Height: 0.80 in (20.32 mm) with RJ-45 Ethernet connector

Connectors/Pinouts

  • SO-DIMM 144-position socket main signal connector
    • AMP 390112-1 or equivalent
    • Suitable for manual and machine placement
  • On-board JTAG connector
  • See Hardware Reference Manual for complete connector and pinout information

Power Requirements

  • Module: 3.3VDC @800 mA max
  • USB interface: 5VDC @500 mA max per port (optional)

Regulatory Approvals (In Progress)

  • FCC, Part 15 Class B
  • EN55022, Class B
  • EN61000-3-2 and EN61000-3-3
  • ICES-003, Class B
  • VCCI, Class II
  • AS 3548
  • FCC Part 15 Subpart C Section 15.247
  • IC (Industry Canada) RSS-210 Issue 5 Section 6.2.2(o)
  • EN300 328
  • EN301 489-3
  • UL 60950-1
  • EN60950 (European Union)
  • CSA C22.2, No. 60950
  • EN55024

Digi JumpStart Kit for NET+OS

  • Microcross™ GNU X-Tools
  • Eclipse-based Digi Workbench IDE
  • Documentation
    • Hardware Reference Manual
    • Programmer’s Guide
    • API Reference
    • Advanced Web Server Toolkit
  • Sample code
  • Driver source code
    • Serial, Ethernet, I2C, SPI, USB, LCD
  • ConnectCore Wi-9C module
  • Development board
  • USB debugger or gdb software debugger
  • ThreadX Real-Time Operating System with picokernel™ architecture
    • Requires less than 25 Kb code space
  • High-performance TCP/IP stack with full networking protocol and extended network services support
  • Universal IP address assignment through Address Configuration Executive (ACE)
  • Network discovery services
    • ADDP, LDAPv3
  • Allegro Software Embedded Web Server
  • SSL 3.0/TLS 1.0 with strong encryption
    • DES, 3DES, AES (NIST certified)
  • Flexible and robust file system supporting RAM and Flash
  • SMICng SNMP MIB compiler
  • Micro XML SAX parser
  • Additional utilities
    • HTML-to-C compiler
    • Flash download

Digi JumpStart Kit for Embedded Linux

  • GNU toolchain (gcc/binutils/uClibc)
  • Eclipse-based Digi Workbench IDE
  • Linux kernel 2.6.x w/patches
  • BSP source code
  • Boot loader w/source files
  • Sample files and documentation
  • ConnectCore Wi-9C module
  • Development board
  • Power supply and cords
  • USB debugger/JTAG booster and adapter
    • Flash programming/verification
    • I2C device access
    • CPU signal tests

Digi JumpStart Kit for NET+OS for Microsoft Windows Embedded CE 6.0

  • Microsoft Windows Embedded CE 6.0 BSP
    • BSP source code
    • Boot loader w/source files
  • Microsoft QFEs
  • Sample files and documentation
  • ConnectCore Wi-9C module
  • Development board
  • Power supply and cords
  • JTAG booster and adapter
    • Flash programming/verification
    • I2C device access
    • CPU signal tests
 

 

Plan du site | Carrières
Copyright © 1996-2008 Digi International. Tous droits réservés.