PortServer® TS P MEI

Série autoalimenté

Descriptif
Modèles
Caractéristiques
Documentation
En savoir plus

Une plus grande vue

Supporte les alimentations de type Ethernet auto-alimenté et série auto-alimenté
« Power over Ethernet » (PoE) end-span et mid-span
1, 2 ou 4 ports RS-232/422/485

La famille PortServer TS P MEI facilite la connexion de périphériques série RS-232/422/485 à un réseau IP. Étant donné qu'il supporte les options d'alimentation du type Ethernet auto-alimenté et série auto-alimenté, le PortServer TS P MEI peut s'adapter à de nombreuses applications requérant des alternatives aux alimentations classiques.

	Amérique du Nord:	International:
PortServer TS 2 P MEI (mid- and end-span PoE) Plus d'info	70002315	70001992	Nous contacter
PortServer TS 4 P MEI (mid- and end-span PoE) Plus d'info	70002316	70001993	Nous contacter

Specifications	PortServer® TS 1 P MEI	PortServer® TS 2 P MEI	PortServer® TS 4 P MEI
Features
Management	HTTP/HTTPS, CLI, SNMP (read/write), Digi Port Authority-Remote management diagnostics and auto-discovery tool
Protocols	UDP/TCP, PPP, DHCP/RARP/ARP-Ping for IP Address assignment, Extended Telnet RFC 2217, Telnet, Reverse Telnet, Modbus to Modbus/TCP protocol conversion support
Software	Device-initiated patented RealPort® with encryption COM port redirector
Security	SSHv2
Status LEDs	Link, Power
Operating Systems	AIX, HP-UX, Linux®, SCO® OpenServer™ 5, SCO® OpenServer™ 6, Solaris™ Intel, Solaris™ SPARC, Windows XP®, Windows Server® 2003, Windows Server® 2008, Windows Vista® Note: TCP/UPD Socket Services are operating system independent
Dimensions (L x W x D)	5.25 in x 3.33 in x 0.95 in (13.34 cm x 8.46 cm x 2.42 cm)
Weight	2.25 oz (64.00 g)
Other	802.3af powered Ethernet (mid- and end-span); Full modem and hardware flow control, Modem emulation, Port buffering, RJ-45/DB-9F crossover cable included for optional serial configuration
Interfaces
Serial
Ports	1 RS-232/422/485 RJ-45 (switch selectable); Up to 230 Kbps throughput; Signal support for TXD, RXD, RTS, CTS, DTR, DSR, DCD	2 RS-232/422/485 RJ-45 (switch selectable); Up to 230 Kbps throughput; Signal support for TXD, RXD, RTS, CTS, DTR, DSR, DCD	4 RS-232/422/485 RJ-45 (switch selectable); Up to 230 Kbps throughput; Signal support for TXD, RXD, RTS, CTS, DTR, DSR, DCD
Ethernet
Ports	1 RJ-45 10/100 Mbps 10/100Base-T (auto-sensing); Full or half duplex
Power Requirements
Power Input	9-30 VDC
Power Supply (included)	North America: 12 VDC/.5A max out; 120 VAC in (wall mount) International: 12 VDC/.5A max out; 100-240 VAC in (small brick)
Power Consumption	Typical: 4 W; Max: 6 W
Surge Protection	4 kV burst (EFT) per EN61000-4-4, 2 kV surge per EN61000-4-5
Powered Ethernet	Ethernet Power, IEEE 802.3af compliant, pins 4/5(+) and 7/8(-); 4 kV burst (EFT) per 1000-4-4; 2 kV surge per EN61000-4-5
Serial Power Input	DC input connector, 9-30 VDC, 525 mA max; Serial Port 1, Pin 1 (RI), 9-30 VDC, 525 mA max
Serial Power Output	Available on all serial ports; 1 watt available power with selectable voltage level; Pin 1 (RI) 5 VDC up to 200 mA max; Pin 9 (DTR) 9 VDC up to 100 mA max
Environmental
Operating Temperature	0° C to 50° C (32° F to 122° F)
Relative Humidity	5% to 90% (non-condensing)
Ethernet Isolation	1500VAC min per IEEE802.3/ANSI X3.263
Serial Port Protection (ESD)	+15 kV air 6 AP and +8 kV contact discharge per IEC 100-4-2
Approvals
Safety	UL 1950, CSA 22.2 No. 950
Emissions/Immunity	CE, FCC Part 15 (Class A), EN55024, EN55022 Class A