XBee-PRO® 802.15.4 OEM RF Modules
Performance
- Transmit power output: 63 mW (18 dBm), 100 mW EIRP*
- Indoor/Urban range: Up to 300 ft (100 m)
- Outdoor/RF line-of-sight range: Up to 1 mile (1.6 km)
- RF data rate: 250 Kbps
- Interface data rate: Up to 115.2 Kbps
- Operating frequency: 2.4 GHz
- Receiver sensitivity: -100 dBm
Networking
- Spread Spectrum type: DSSS (Direct Sequence Spread Spectrum)
- Networking topology: Peer-to-peer, point-to-point, point-to-multipoint
- Error handling: Retries & acknowledgements
- Filtration options: PAN ID, channel and addresses
- Channel capacity: 12 Direct Sequence Channels (software selectable)
- Addressing: 65,000 network addresses available for each channel
- Encryption: 128-bit AES
Power
- Supply voltage: 2.8 - 3.4 V
- Transmit current: 215 mA (@ 3.3 V)
- Receive current: 55 mA (@ 3.3 V)
- Power-down sleep current: <10 µA
General
- Frequency band: 2.4000 - 2.4835 GHz
- Serial data interface: 3V CMOS UART - No configuration required
Physical Properties
- Size: 0.960 in x 1.297 in (2.438 cm x 3.294 cm)
- Weight: 0.14 oz (4g) - w/ U.FL connector
- Antenna options: U.FL RF connector, chip antenna, or whip antenna
- Operating temperature: -40° C to 85° C (industrial)
Certifications
- United States (FCC): OUR-XBEEPRO
- Canada (IC): 4214A-XBEEPRO
- Europe (CE): ETSI
- Australia: Approved
- RoHS: Available
Line Art
- 802.15.4 - Star
- Side Views
- Top Views
* When operating in Europe: XBee-PRO modules must be configured to operate at a maximum TX power output level of 10 dBm (power level is set using AT commands). Additionally, European regulations stipulate an EIRP power maximum of 12.86 dBm (19 mW).