Drop-in Networking Professional Development Kit
ConnectPort X2 Gateway
Interfaces- Physical: 1 RJ-45 Ethernet port
- Air: 1 XBee-PRO® module (2.4 GHz ZigBee/802.15.4)
- Network protocols: UDP/TCP, DHCP
- LEDs: Ethernet status, power, ZigBee link/activity
- NAT
- Port forwarding
- Access control lists (IP filtering)
- HTTP web interface
- Password access control
- IP service port control
- Optional secure enterprise management via Digi Connectware® Manager
- Python programmability
- Onboard Python engine provides application customization tool
- Power input: 9-30VDC
- Power consumption:
- Idle: 1.2 W
- Max: 3.4 W
XBee Wall Router (for mesh kit versions)
General- Frequency: 2.4 GHz (ISM)
- Internal antenna
- Locking mechanism - secure unit to electrical outlet using center outlet screw (U.S. only)
- Number of channels: 16 - 5 MHz channels (Direct Sequence Spread Spectrum)
- Filtration options: PAN ID, Channel, 2^64 (64-bit) addresses
- Power: Solid when external power is supplied
- Associate: Blinks when unit is connected and associated to an RF network
- Device reset
- Configuration reset to factory defaults
- Identification/Commissioning mode
- Temperature sensor:
- Range: -20° C to 70° C (-4° F to 158° F)
- Accuracy: +/- 2° C
- Ambient light sensor:
- Range of spectral bandwidth: 360 to 970 nm (similar to human eye)
- Wavelength of peak sensitivity: 570 nm
- Power input: Universal AC input (85VAC to 265VAC)
XBee USB Adapter (for multipoint kit versions)
General- Interface: USB 2.0 Full speed (w/ ESD protection); connects to host via captive 2 meter cable
- Operating temperature range: -40C to 85C
- Power requirements
- Bus powered: +5V from USB bus
- Power consumption in normal operation: 70mA (Rx), 250 mA (Tx)
- Power consumption in suspend mode: 200uA
- Transmit power
- XBee: 1 mw (0 dBm)
- XBee-PRO: 63 mW (+18 dBm)
- Indoor/Urban range:
- XBee: 100 ft (30 m)
- XBee-PRO: 300 ft (100 m)
- Outdoor/Line-of-sight range:
- XBee: 300 ft (100 mile)
- XBee-PRO: 1 mi (1.8 km)
- 250,000 bps RF data rate
- 2.4 GHz (ISM) ZigBee/802.15.4 OEM RF modules
- Low power sleep modes enable power down currents less than 10 uA
- Industrial (-40° C to 85° C) temperature rating
- Support point-to-point, point-tomultipoint, peer-to-peer and mesh (XBee ZNet 2.5 version only) topologies
- No out-of-box configuration
- Compatible with Digi''s ConnectPort X family of gateways for IP connectivity
