Home  >  Products   >  Search: PWMRemove from results

Reliable Connectivity Products

You've Selected

Search: PWM
Remove

Search Within


Narrow Results

Wireless Interfaces

Wired Interfaces

Brand

Processor

Brand

USB Version


Browse by Keyword
Results: 28 Products
Compact viewList view
XBee-PRO® 900HP
900 MHz RF Module
  • Superior outdoor LOS range of up to 28 miles with high-gain antenna
  • RF data rate up to 200 Kbps
  • Patent-pending channel selectivity algorithm allows for more dense networks
  • DigiMesh or point-to-multipoint topologies
  • Programmable versions enable custom application development
Rabbit RIO Programmable I/O Application Kit
Intelligent I/O expansion chip
  • Easily interface to any CPU via an available SPI or parallel port
  • Instantly add up to 32 digital I/O lines
  • 8 independent functional channels with 4 ports each
  • Functional channels configurable as: Bi-directional I/O, PWM or PPM outputs, TRIAC signal generators, input capture, counter, Quadrature decode peripheral
  • Add I/O and peripheral features to any new or existing design
  • Use multiple Rabbit RIO devices for large I/O requirements
SBC BL4S200
Single-board computer
  • Uses Rabbit® 4000 and Rabbit 5000 microprocessors
  • Choice of Wi-Fi, ZigBee or Ethernet connectivity
  • 40 digital I/O and up to 5 serial ports
  • 8 input and 2 output analog channels
  • Advanced I/O subsystem is software configurable reducing the load on the processor
  • I/O features include event/capture counting, quadrature decoders, PWMs and PPMs
MiniCore RCM6700
High performance embedded device servers
  • Rabbit® 6000 running up to 200 MHz
  • 10/100 Ethernet and pin-compatible with MiniCore 802.11b/g wireless modules
  • 1 MB of internal RAM for program storage
  • Up to 4 MB of serial Flash for datalogging or web page storage
  • Flexible Interface Module (FIM) provides protocol support for CANbus or SD/SDIO
  • Device Cloud by Etherios platform provides cost-effective cloud computing for remote device management
  • Seamless migration to chip level design
  • 5X greater throughput performance
MiniCore RCM5700
Ultra-compact serial to Ethernet module
  • 10/100Base-T Ethernet
  • Up to 640 KB SRAM for data, 1 MB flash memory for program storage, 2 MB serial flash for mass storage
  • Up to 32 GPIO lines and 6 serial ports
  • Serial to Ethernet bridge
  • Embedded web server, remote firmware update, open source code and royalty-free
  • Cost-competitive embedded solution
  • Quick time to market
XBee® ZB
RF modules utilizing the ZigBee PRO Feature Set
  • Development Kit - $299
  • ZigBee PRO mesh features self-healing and discovery for network stability
  • Advanced configuration options available via simple AT or API commands
  • No configuration needed for out-of-the-box RF communications
  • Common XBee footprint for a variety of RF modules
RabbitCore RCM5400W
Microprocessor core module
  • Rabbit 5000 running at 74 MHz
  • Up to 2 MB of serial flash for data intensive applications utilizing FAT file system
  • 39 digital I/O lines and up to 6 serial ports
  • Integrated IEEE 802.11b/g Wi-Fi
  • 802.11i security compliance supporting WPA and WPA2 enterprise authentication
  • Wireless web server capability
  • Easy C-language program development and debugging
  • Low design risk – deploy with confidence into any Wi-Fi network, reduce development time by 50%
Simple Sensor Application Kit
Connecting a 1-Wire® bus to a Rabbit® embedded system
  • RCM4300 Development Kit
  • Up to 1GB in flash memory
  • DS2406 SPST addressable switch, DS18B20 temperature sensor, DS2450 A/D converter, DS2480B line driver
  • 1-Wire based application samples
  • Web Server capability
  • Sample program on how to detect and manage 1-Wire via a Web Interface
  • Easy-to-use integrated design environment
RabbitCore RCM3900
Microprocessor core module
  • Rabbit® 3000 microprocessor at 44 MHz
  • Extended operating temperature range: -20° C to +80° C
  • 10/100Base-T Ethernet
  • Up to 1 GB microSD hot-swappable storage
  • Lower-risk design of embedded systems applications
  • Software debugging directly on target hardware
  • Rabbit 4000 at 29.49 MHz
  • Designed for ZigBee connectivity
  • 512K Flash, 512K data SRAM
  • Up to 40 general-purpose I/O line configurable
  • Web Server capability
  • Wireless mesh networking capability
  • Low power
ConnectCore® 6
Freescale i.MX6 Cortex A9 system-on-module
  • Scalable Cortex-A9 multi-core performance
  • Cortex-M0+/M4 microcontroller assist
  • Cost-effective, reliable,  low-profile surface-mount module form factor
  • Pre-certified 802.11a/b/g/n and Bluetooth 4.0 connectivity
  • Integrated high-efficiency PMIC
  • Linux, Android and Windows Embedded software platform support
  • Seamless Device Cloud integration
  • Designed for long-term availability
ConnectCard for i.MX28
Compact wired and wireless core module
  • Cost-effective design in compact form factor
  • 32-bit ARM processor at up to 454 MHz
  • Pre-approved 802.11a/b/g/n Wi-Fi + Bluetooth 4.0
ConnectCore i.MX53 / Wi-i.MX53
Freescale i.MX53 Cortex A8 system-on-module
  • High-end 1 GHz Cortex-A8 System-on-Module solution
  • 802.11abgn, Bluetooth 4.0, Ethernet and CAN Bus connectivity
  • Integrated 2D/3D graphics and 1080p video processing
NS9215
Cost-efficient 150 MHz ARM926EJ-S microprocessor
  • Cost-efficient, compact ARM9 up to 150 MHz 
  • Ethernet interface and AES encryption engine 
  • 2 independent, programmable interface modules
  • Digi-patented dynamic power management 
  • Complete set of on-chip peripheral interfaces
ConnectCore i.MX51 / Wi-i.MX51
Freescale i.MX51 Cortex A8 system-on-module (SoM)
  • Freescale i.MX51 Cortex A8 system-on-module (SoM)
  • Integrated secure wireless 802.11abgn Wi-Fi WLAN
  • Powerful 2D/3D and 720p video capabilities
NS9210
Cost-efficient, small footprint ARM9 microprocessor
  • Cost-efficient 150 MHz Digi ARM9 processor with integrated Ethernet, AES, and programmable interfaces 
  • Pin-compatible with NS7520 for easy design migration
  • Development kit support for NET+OS
ConnectCore Wi-9P 9215
Highly integrated 802.11a/b/g wireless core module
  • Compact, cost-efficient 150 MHz ARM9 module
  • Secure 802.11abg Wi-Fi networking
  • Programmable interface modules
  • Dynamic power management options
ConnectCore 9P 9215
Highly integrated, network-enabled core module
  • Compact, cost-efficient 150 MHz ARM9 module
  • Secure high-performance Ethernet networking
  • Programmable interface modules
  • Dynamic power management options
Rabbit 6000
Communications and Control Processor
  • Clock speed up to 200 MHz
  • On-board 802.11 a/b/g and 10/100 Ethernet
  • 64 I/O and up to 6 serial ports (4 as SPI)
  • 1 MB internal DRAM and 32K battery backable SRAM
  • USB 2.0 full speed host
  • 12-bit A/D converter samples up to 1Megasamples/s
  • Ideal for industrial motor control
  • Integrated hardware and software environment
  • Easily add an HMI as well as CANbus protocol support with the on-board FIMs
  • 4 PWM channels, 4 PPM channels
MiniCore RCM5600W
Ultra-compact Wi-Fi module
  • Rabbit® 5000 running at 74 MHz
  • On-board single-chip 802.11b/g transceiver
  • Up to 32 GPIO lines and 6 serial ports
  • 1 MB of SRAM and up to 4 MB of serial flash
  • Update firmware wirelessly
  • Embedded web server
RabbitCore RCM3700
Microprocessor core module
  • Up to 4 serial ports for multiple device connectivity
  • 10Base-T with optional 10/100Base-T Ethernet
  • Up to 512K Flash for code and up to 512K SRAM for data
  • 1 MB of on-board serial Flash utilizing FAT file support for reliable data storage
  • Embedded web server capability for remote monitoring and control
  • Exceptionally fast performance for math, logic and I/O
RabbitCore RCM4300
Microprocessor core module
  • Rabbit 4000 running at 58.98 MHz
  • Supports up to 2 GB microSD memory card, 1 MB SRAM for shared code, 512K of battery-backed SRAM, FAT file organization
  • 10/100Base-T Ethernet, 36 GPIO, 6 serial ports
  • 8 channel 12-bit resolution (RCM4300 only)
  • Embedded web server
  • Easily implement secure embedded devices with client side SSL or AES encryption
  • Included Remote Program Update allows for firmware updates from anywhere in the world
RabbitCore RCM3600
Microprocessor core module
  • Rabbit 3000 microprocessor at 22 MHz
  • Up to 512K Flash/512K SRAM
  • 33 parallel digital I/O with configurable options
  • 4 serial ports (IrDA, HDLC, async, SPI)
  • 5VDC input, 3.3VDC interface
  • Compact footprint: 2.11” x 1.23” x 0.62” (54 mm x 31 mm x 16 mm)
  • Ready-made platform for fast time-to-market – save up to 3 months of design integration time
  • Low-cost embedded microprocessor module
RabbitCore RCM4200
Microprocessor core module
  • Rabbit 4000 running at 59 MHz
  • 10/100Base-T Ethernet, RJ-45 jack
  • 512K Flash / 512K Data SRAM
  • 4 MB or 8 MB Serial Flash for data storage
  • Up to 35 GPIO, up to 5 serial ports
  • 8 channels 12-bit A/D converter option
  • Embedded device networking, intelligence, I/O control and web server capability
  • Abilty to remotely update firmware
Rabbit 3000
Low EMI, high performance microprocessor
  • 55 MHz max clock speed
  • 56+ I/O lines and 6 CMOS-compatible serial ports
  • Ten 8-bit timers and one 10-bit timer with 2 match registers
  • Hardware and/or software support for TCP/IP, IrDA, SDLC/HDLC, Async, SPI, I2C
  • Extended low-power “sleepy” modes
  • Watchdog timer
  • TCP/IP connectivity allows for programming and debugging Rabbit processor-based systems over intranets or the Internet
RabbitCore RCM4100
Microprocessor core module
  • Rabbit 4000 running up to 59 MHz
  • 512K Flash, 256K / 512K Data SRAM
  • Up to 40 GPIO, up to 6 CMOS-compatible serial ports
  • Auxiliary I/O feature for reducing processor bus loading
  • 8 channels 12-bit A/D converter(RCM4100)
  • Ideal for device intelligence and control
  • Well suited for easy integration with peripheral technologies such as GPS, cellular modems, RFID readers, sensors, etc.
RabbitCore RCM4000
Communications and control processor
  • Rabbit 4000 running at 59 MHz
  • Up to 1 MB (16-bit) Program Flash, 1 MB (16-bit) SRAM, 32 MB of Flash memory
  • 10Base-T Ethernet (RJ-45 connector), up to 28 GPIO, up to 5 serial ports
  • 8 channels 12-bit A/D converter
  • Web server capability and remote device control
  • Low-cost and easily deployable platform for non-critical embedded security
  • Security-key feature with “tamper detect” and encryption capabilities
RabbitCore RCM3309
Microprocessor core module
  • Rabbit® 3000 microprocessor at 44 MHz
  • 10/100Base-T Ethernet, RJ-45
  • 512K Flash/512K SRAM/512K Program Execution SRAM
  • 4 MB or 8 MB serial Flash
  • 49 digital I/O and 5 serial ports
  • Plenty of storage with safe and secure firmware and data transfers
  • Debug software directly on target hardware

 

Contact a Digi expert and get started today! CONTACT US