ConnectPort® TS 4x4

Serial Device Server and Ethernet Switch

  • Python development environment for custom applications
  • IPv4/IPv6 capable
  • SLS/TLS and SSHv2 for added security
  • Supports multiple serial and Ethernet ports
How to Buy

The ConnectPort TS 4x4 family of device servers provides serial device network connectivity and remote Ethernet switch capability. Supporting multiple serial and Ethernet ports, this product is ideal for medical, utility, traffic, retail and POS, industrial automation, banking and many more applications.

Digi’s patented RealPort® software establishes a connection between the server and networked serial devices, creating a local COM/TTY port on the server. RealPort technology allows almost any software application to work with Digi networked device servers without modification.

The Python® development environment built into ConnectPort TS 4x4 device servers enables application customization. This easy-to-use, universal programming language allows complete control of device connections, data manipulation and event based actions.

  ConnectPort TS 4x4
Management HTTP/HTTPS, SSH, CLI or Telnet, Optional secure enterprise management via Digi Connectware® Manager
Protocols UDP/TCP, DHCP, SSH, Extended Telnet RFC 2217, Telnet, Reverse Telnet, IPv4/IPv6, Modbus to Modbus/TCP protocol conversion support
Software Patented RealPort COM port redirector for COM/TTY ports for Microsoft® Windows®, UNIX® and Linux®, RFC2217, Python® custom development environment
Status LEDs Ethernet (link and activity), power on diagnostic
Dimensions (L x W x H) & Weight 7.75 in x 4.11 in x 1.30 in (19.7 cm x 10.40 cm x 3.30 cm), 1.4 lbs (0.64 kg)
Security SSL, SSL/TLS, SSHv2, FIPS 197 (serial port), SNMPv2, PPP
Ports 4 RS-232 RJ-45 serial ports
Throughput Up to 230 Kbps
Signal Support TXD, RXD, RTS, CTS, DTR, DSR, DCD
Ports 4 RJ-45 switch ports
Physical Layer/Data Rate 10/100Base-T, 10/100 Mbps
Mode Full or Half duplex
Power Requirements
Power Input 9-30VDC
Power Supply 12VDC power supply for 0° C to +60° C (32° F to +140° F) with locking barrel connector included
Power Consumption Idle: 3.1 W, Max: 11.5 W
Surge Protection 4 kV burst (EFT) per EN61000-4-4, 2 kV surge per EN61000-4-5
Operating Temperature 0° C to +60° C (32° F to +140° F)
Storage Temperature -40° C to +85° C (-40° F to +185° F)
Relative Humidity 5% to 95% (non-condensing)
Ethernet Isolation 1500VAC min per IEEE802.3/ANSI X3.263
Serial Port Protection (ESD) +8kV Air discharge and +4kV Direct discharge, per EN61000-4-2
Safety UL 60950, CSA 22.2 No. 60950, EN60950
Emissions/Immunity CE, FCC Part 15 (Class A), AS/NZS CISPR 22, EN55024, EN55022 (Class A)

Cable-to-Adapter Cross Reference

For ConnectPort TS and LTS, PortServes TS, Digi Neo and other Digi products with RJ-45 10 pin Connectors.

Note: Digi Passport, Digi CM and Etherlite use different pinouts, please refer to the appropriate product documentation

RJ-45 to Male or Female Straight or Crossover Application Cable or Adapter Pin-out Part Number Cable Identifier
DB-9 F Crossover Bay Accelar, Nortel and other DB-9 DTE devices Cable 76000645 (4’) How to buy 61090048
Adapter (4-Pack) 76000697 How to buy N/A
DB-9 M Crossover DTE devices with DB-9 female ports Cable 76000264 (4’) How to buy 61080048
Adapter None None N/A
DB-9 F Straight Modems and other DCE devices with DB-9 male ports Cable 76000200 (2’)
76000201 (4’)
How to buy
How to buy
Adapter None None N/A
DB-9 M Straight Modems and other DCE devices with DB-9 female ports Cable 76000239 (2’)
76000240 (4’)
How to buy
How to buy
Adapter (4-Pack) 76000701 How to buy N/A
DB-25 M Crossover Sun Sparc, Sun Ultra, terminals, printers and other DTE devices with DB-25 female ports Cable 76000238 (4’) How to buy 61040048
Adapter (4-Pack) 76000698 How to buy N/A
DB-25 F Crossover Cisco, IBM and other DTE devices with DB-25 male ports Cable 76000644 (4’) How to buy 61050048
Adapter (4-Pack) 76000699 How to buy N/A
DB-25 M Straight Modems and other DCE devices with DB-25 female ports Cable 76000129 (2’)
76000195 (4’)
How to buy
How to buy
Adapter (4-Pack) 76000700 How to buy N/A
DB-25 F Straight Modems and other DCE devices with DB-25 male ports Cable 76000198 (2’)
76000199 (4’)
How to buy
How to buy
Adapter None N/A
DB-25 M *Special* For use with printers. This cable utilizes the DTR signal (instead of RTS) for hardware flow control. Cable 76000643 (2’) How to buy 63000196-01
Adapter (4-Pack) 76000692 How to buy N/A
RJ-45 M *Special* For use with Cisco and Sun RJ-45 console ports. Cable 76000631 (6’)
76000632 (qty 8)
76000633 (qty 16)
How to buy
How to buy
How to buy
Adapter None None N/A
  • All RJ-45 to DBx cables are 10-pin. Only the RJ-45 to RJ-45 cable is an 8-pin cable.
  • All RJ-45 adapters are 8-pin. When using these adapters with modems or other applications that require DCD on pin 1, you must turn on altpin.
  • If altpin is turned off, the hardware signal on pin 1 becomes DSR instead of DCD. This alternative can be used if DCD is not required, and DSR is needed instead.


Feature Specs

Product Datasheets

Recently Viewed

Contact a Digi expert and get started today! Contact Us