DataFire® SYNC/570i
Digital WAN adapters
- Cost-effective digital WAN adapters
- DMA-to-shared memory architecture
- 4 DMA channels on 2-port boards
- 8 DMA channels on 4-port boards
- DDKs available for custom development
- Product datasheet
The Digi DataFire SYNC/570i family of synchronous WAN communication adapters is a cost-effective line of products for LAN-to-LAN, client-to-LAN and client-to-IBM host connectivity. It is ideal for branch office and enterprise solutions where two to 16 ports per server are required. As a complete hardware and software solution, the DataFire SYNC/570i provides tightly integrated remote LAN connectivity for major operating system environments including Windows NT® 4.0, Windows® 2000 and Windows XP. Additional support for other operating systems is offered by our software partners.
| DataFire SYNC/570i | North America: | International: | |
|
DataFire SYNC/570i PCI (5V only) 2-port 256K UIB
View details |
77000536 Service agreement |
77000536 |
 Contact us |
|
DataFire SYNC/570i PCI (5V only) 4-port 256K UIB
View details |
70001321 Service agreement |
70001321 |
Contact us |
|
DataFire SYNC/570i Universal PCI 2P UIB
View details |
77000850 Service agreement |
77000850 |
Contact us |
|
DataFire SYNC/570i Universal PCI 4P UIB
View details |
70001895 Service agreement |
70001895 |
Contact us |
|
DataFire SYNC/570i PCI V.35 Cable
View details |
76000292 |
76000292 |
Contact us |
|
DataFire SYNC/570i PCI RS-232 DB-25 Cable
View details |
76000293 |
76000293 |
Contact us |
| Specifications | DataFire® SYNC/570i |
| Features | |
| Serial Ports | 2 or 4 RS-232 and V.35 |
| PCI Card Slot | Universal 3.3V and 5V support |
| Line Speed | Aggregated performance up to 5 Mbps |
| Memory | Supports 4 DMA channels on 2-port boards; 8 DMA channels on 4-port boards |
| Operating Systems | Windows NT® 4.0, Windows® 2000, Windows® XP, Third Party X.25, Frame Relay and SNA solutions for UnixWare™, OS/2, QNX, Linux® and DOS available |
| Dimensions (L x W x H) |
4.2 in x 0.68 in x 7.4 in (10.7 cm x 1.7 cm x 18.7 cm) |
| Weight | 8.0 oz (210.2 g) |
| Other | Software configurable I/O and memory addresses, UIB automatic interface detection |
| Software | |
| Protocol | Supports frame relay, X.25, PPP and SNA |
| Graphical Interface | Easy-to-use, Full tracking and monitoring |
| Routing | Supports IP/IPX |
| Circuits | Supports up to 256 virtual circuits (X.25) |
| Flow Control | BECN, LMI |
| Frame Relay | Supports up to 64 DLCIs per board |
| Transmission | Multiple CIR options |
| Compliance | Microsoft's NDIS and WAN Miniport driver |
| Data Flow | DTE/DCE support |
| Power Requirements | |
| +5VDC | 1.5 A |
| +3.3VDC | 0.5 mA |
| +12VDC | 90 mA |
| Surge Protection | Surge protection on all data lines |
| Environmental | |
| Operating Temperature | 10° C to 55° C (50° F to 131° F) |
| Relative Humidity | 5% to 90% (non-condensing) |
| Altitude | 0 to 3,660 meters (0 to 12,000 feet) |
| Regulatory Approvals | |
| Safety | UL 1950, CSA 22.2, EN60950 |
| Emissions/Immunity | FCC Part 15 Subpart B, EN55022 (Class B), EN50082-2, ICES-003, CISPR 22 (Class B) |
Product Literature
Related Links
The DataFire SYNC/570i delivers tightly integrated synchronous remote connectivity. This WAN adapter is a cost-effective solution for LAN-to-LAN, client-to-LAN and client-to-IBM host connectivity. It is ideal for branch office and enterprise solutions where two to 16 ports per server are required.
Designed on the Hitachi HD64570 Serial Communications Adapter (SCA) chip, this high-performing synchronous adapter features Direct Memory Access (DMA)-to-shared memory architecture. The on-board 256K memory is directly addressable by the system and the DMA of the SCA.
The DataFire SYNC/570i is a complete hardware and software solution, supporting all the major operating systems. A Universal Interface Bus (UIB) enables a different interface on each port, without using jumpers or switches. Each port can report the status of modem signals and attached cables. Each interface can measure and report the speed of modems and CSU/DSUs.
DDKs for Quick and Easy Porting
Digi provides DataFire development tools to access and control protocols supported by Digi’s WAN interface adapters for platform-independent software development. All of the necessary product information to develop a program with SNA emulation, X.25 or Frame Relay can be found in the DDK.
