Digi One® IAP Haz
Serial-to-Ethernet connectivity for hazardous locations
- Hardened design and extended operating temperature
- Conformal coated circuit board
- Industrial protocol conversion and interoperability
- Multi-master/multi-protocol support
- Switch selectable RS-232/422/485
- Product datasheet
Featured Models/Part Numbers
| North America: | International: | ||
|
Digi One IAP Haz
View details | Related accessories |
70002326 |
70002326 |
![]() Contact us |
| North America: | International: | ||
|
Digi One IAP Haz
View details | Related accessories |
70002326 |
70002326 |
![]() Contact us |
| Specifications | Digi One® IAP Haz |
| Features | |
| Management | HTTP configuration, Digi Port Authority–Remote management diagnostics and auto-discovery tool, SNMP (read/write) |
| Protocols | Telnet, Reverse Telnet, RFC2217, TCP/UDP Socket Services, PPP, DHCP/RARP, ARP-Ping, Static IP for IP address assignment, Support for 64 concurrent socket connections, ASCII, DF1, Modbus RTU/ASCII, Modbus/TCP, EtherNet/IP, Allen-Bradley Ethernet |
| Software | Patented RealPort for COM/TTY ports |
| Security | SSHv2, SSL, TLS, HTTPS |
| Operating Systems | AIX, HP-UX, Linux®, SCO® OpenServer™ 5, SCO® OpenServer™ 6, Solaris™ Intel, Solaris™ SPARC, Windows XP®, Windows Server® 2003, Windows Server® 2008, Windows Vista® |
| Status LEDs | Serial signals, Power, Ethernet and diagnostics |
| Dimensions (L x W x D) | 4.70 in x 0.90 in x 4.0 in (12.00 cm x 2.30 cm x 10.10 cm) |
| Weight | 2.5 oz (64.0 g) |
| Other | Full modem and hardware flow control, Flash upgradeable firmware, 6 ms serial over Ethernet latency, Conformal coated PCB, 35 mm DIN rail mounting |
| Interfaces | |
| Serial Ports | 1 RS-232/422/485 (switch selectable) |
| Serial Connector | DB-9M with screw terminal connectors, can act as second direct RS-232 port connection to device on screw terminal |
| Serial Throughput | Up to 230 Kbps |
| Ethernet Physical Layer | 10/100Base-T |
| Power Requirements | |
| Power Input | 9-30VDC @ 0.5Amps max |
| Power Supply | Removable screw terminal for power (power supply not included) |
| Surge Protection | 2 kV isolation between power supply and serial ground product |
| Environmental | |
| Operating Temperature | -35° C to +74° C (-31° F to +165° F) |
| Relative Humidity | 5% to 90% (non-condensing) |
| Ethernet Isolation | 1500VAC min per IEEE 802.3/ANSI X3.263 |
| Serial Port Protection (ESD) | +15 kV air GAP and +8 Kv contact discharge per IEC 1000-4-2 |
| Regulatory Approvals | |
| Safety | UL 1950, UL 1604 (Class 1, Div. 2), CSA 22.2 No 950, EN60950 |
| Emissions/Immunity | FCC Part 15 (Class A), ICES-003 (Class A), CE, AS3548, EN6100-6-2 + EN55024, EN55022 (Class A) |
Digi One IAP Haz - Top

Digi One IAP Haz - Bottom


Literature
Support Documentation
General Support Documentation:
- Command Reference: Device and Terminal Server Products
- Digi Connectware Cable Guide
- Digi One IAP User's Guide (IA Profiles)
- Hardware Change Notification: Digi One IA/IAP
- Multi-OS Digi Port Authority Remote (DPA-Remote) Setup Guide
- Portserver TS Family User Guide
- Quick Start Guide: Digi One IA/IAP
- Users Guide: RealPort Installation Guide
- Application Guide: (Rev E and later) Setting up DigiOne-IAP for Rockwell Bridging, including linking a serial PLC & serial HMI
- Application Guide: (Rev E and later) Setting up DigiOne-IAP for EDS
- Application Guide: (Rev E and later) Setting up Digi One IAP for Modbus Bridging, including linking a serial PLC & serial HMI
- Application Guide: (Rev E and later) What's New in Digi One IAP Release E
- Application Guide: (Rev E and later) Setting up Digi One IAP with 2 DF1 devices for RSLinx 2.41
- Application Guide: A-B/Rockwell Automation Peer-to-Peer with Digi One IAP Firmware E and Later
- Application Guide: Connecting Rockwell ControlLogix to Modbus Slaves by Digi One IAP fw E
- Application Guide: Digi One IAP allows polling ASCII devices as Modbus Slaves
- Application Guide: Digi Protocol Bridging Calculator for Master speaking Modbus protocols
- Application Guide: Digi Protocol Bridging Calculator for Master speaking Rockwell protocols
- Application Guide: Polling Rockwell PLC and ControlLogix as Modbus Slaves with Digi One IAP
- Application Guide: Understanding Timeout Settings in Digi One IAP
- Application Guide: Using Digi Products in the Real World: Issues of Grounding, Isolation, and Surges
- Application Guide: (Rev E and later) Rockwell ControlLogix polling ASCII devices as PCCC slaves
- Application Guide: (Rev E and later) Setting Up Digi RealPort and RSLinx
- Application Guide: (Rev E and later) Saving and Restoring Digi One IAP Configuration
- Application Guide: (Rev E and later) Encrypted Data with Digi One IAP
Learning Center
Related Links
- Industrial automation product applications
- Wireless serial cable replacement
- Support
- Warranty registration
Digi One IAP Haz combines reliable serial-to-Ethernet connectivity with protocol conversion and interoperability. Users can IP enable a broad range of serial devices, as well as link two industrial devices. Designed for use in harsh environments, this rugged serial server is ideal for device management and monitoring applications where exposure to extreme temperatures, volatile liquids and gases are common. Its hardened design and Class 1, Division 2 certification ensure reliable performance in extreme conditions, reducing operating risk and the costs associated with application failure.
Digi One IAP Haz combines serial server functionality with a protocol bridge. Applications may communicate with the serial device using TCP/UDP or Digi’s patented RealPort® COM port redirection for remote native COM port access. RealPort enables existing applications to communicate, without modification, with serial devices over the Ethernet. By creating a Modbus bridge multiple Modbus/TCP masters can share Modbus serial slaves or Modbus serial Masters can access Modbus/TCP slaves.
Digi One IAP Haz supports a variety of serial (DF1, Modbus, ASCII) and Ethernet (ModbusTCP, AB/Ethernet, Ethernet/IP) protocols, allowing users to bridge serial and Ethernet devices, or both. Multi-master access allows multiple masters to communicate with a single slave across protocols. Digi One IAP Haz converts ASCII data from serial devices to Ethernet protocols. An additional serial port allows local devices to communicate with a slave unit, without disrupting the serial-to-Ethernet connection.







