PortServer TS P MEI serial servers make it easy to connect RS-232/422/485 serial devices to an IP network. By supporting versatile powering options like powered Ethernet and powered serial, they can adapt to many applications where traditional power alternatives are required. Available in one-, two- and four-port versions, PortServer TS P MEI delivers universal, high performance multiport serial-to-Ethernet connectivity.
Powered Ethernet (802.3af, mid- and end-span support) makes it possible to run just one Ethernet cable to the device server for both power and communications. The powered serial feature enables PortServer TS P MEI to power a device over serial using Ring Indicator (RI) or DTR pins, or it can be powered itself using RI (Port 1 only). Each power feature is available in addition to a traditional power connector, and can serve as redundant power in case of an outage from either source.
Available in one-, two- and four-port versions, PortServer TS P MEI serial servers deliver universal, high performance multiport serial-to-Ethernet connectivity. It is ideal for applications requiring COM ports, serial tunneling, or where TCP/UDP Socket functionality is needed.
Read more
| North America: | International: | ||
| PortServer TS 2 P MEI (mid- and end-span PoE) View details |
70002315 |
70001992 |
 Contact Us |
| PortServer TS 4 P MEI (mid- and end-span PoE) View details |
70002316 |
70001993 |
Contact Us |
| Specifications | PortServer® TS 1 P MEI | PortServer® TS 2 P MEI | PortServer® TS 4 P MEI |
| Features | |||
| Management | HTTP/HTTPS, CLI, SNMP (read/write), Digi Port Authority-Remote management diagnostics and auto-discovery tool | ||
| Protocols | UDP/TCP, PPP, DHCP/RARP/ARP-Ping for IP Address assignment, Extended Telnet RFC 2217, Telnet, Reverse Telnet, Modbus to Modbus/TCP protocol conversion support | ||
| Software | Device-initiated patented RealPort® with encryption COM port redirector | ||
| Security | SSHv2 | ||
| Status LEDs | Link, Power | ||
| Operating Systems | AIX, HP-UX, Linux®, SCO® OpenServer™ 5, SCO® OpenServer™ 6, Solaris™ Intel, Solaris™ SPARC, Windows XP®, Windows Server® 2003, Windows Server® 2008, Windows Vista® Note: TCP/UPD Socket Services are operating system independent |
||
| Dimensions (L x W x D) |
5.25 in x 3.33 in x 0.95 in (13.34 cm x 8.46 cm x 2.42 cm) | ||
| Weight | 2.25 oz (64.00 g) | ||
| Other | 802.3af powered Ethernet (mid- and end-span); Full modem and hardware flow control, Modem emulation, Port buffering, RJ-45/DB-9F crossover cable included for optional serial configuration | ||
| Interfaces | |||
| Serial | |||
| Ports | 1 RS-232/422/485 RJ-45 (switch selectable); Up to 230 Kbps throughput; Signal support for TXD, RXD, RTS, CTS, DTR, DSR, DCD | 2 RS-232/422/485 RJ-45 (switch selectable); Up to 230 Kbps throughput; Signal support for TXD, RXD, RTS, CTS, DTR, DSR, DCD |
4 RS-232/422/485 RJ-45 (switch selectable); Up to 230 Kbps throughput; Signal support for TXD, RXD, RTS, CTS, DTR, DSR, DCD |
| Ethernet | |||
| Ports | 1 RJ-45 10/100 Mbps 10/100Base-T (auto-sensing); Full or half duplex | ||
| Power Requirements | |||
| Power Input | 9-30 VDC | ||
| Power Supply (included) | North America: 12 VDC/.5A max out; 120 VAC in (wall mount) International: 12 VDC/.5A max out; 100-240 VAC in (small brick) | ||
| Power Consumption | Typical: 4 W; Max: 6 W | ||
| Surge Protection | 4 kV burst (EFT) per EN61000-4-4, 2 kV surge per EN61000-4-5 | ||
| Powered Ethernet | Ethernet Power, IEEE 802.3af compliant, pins 4/5(+) and 7/8(-); 4 kV burst (EFT) per 1000-4-4; 2 kV surge per EN61000-4-5 | ||
| Serial Power Input | DC input connector, 9-30 VDC, 525 mA max; Serial Port 1, Pin 1 (RI), 9-30 VDC, 525 mA max | ||
| Serial Power Output | Available on all serial ports; 1 watt available power with selectable voltage level; Pin 1 (RI) 5 VDC up to 200 mA max; Pin 9 (DTR) 9 VDC up to 100 mA max | ||
| Environmental | |||
| Operating Temperature | 0° C to 50° C (32° F to 122° F) | ||
| Relative Humidity | 5% to 90% (non-condensing) | ||
| Ethernet Isolation | 1500VAC min per IEEE802.3/ANSI X3.263 | ||
| Serial Port Protection (ESD) | +15 kV air 6 AP and +8 kV contact discharge per IEC 100-4-2 | ||
| Approvals | |||
| Safety | UL 1950, CSA 22.2 No. 950 | ||
| Emissions/Immunity | CE, FCC Part 15 (Class A), EN55024, EN55022 Class A | ||
PortServer TS P MEI - Front
PortServer TS P MEI - Back
