Digi's XBee wall router is a small extender used to create or expand a ZigBee network, allowing other ZigBee enabled devices to seamlessly communicate with each other. The wall router simply plugs into a standard power outlet for quick and easy deployment. Once deployed, the router acts as a mesh network routing node, expanding the range and adding redundancy to a wireless network.
Additionally, environmental sensors included on the XBee wall router allow ConnectPort® X gateway users to monitor temperature and light conditions throughout the deployment area.
Built upon the extended range XBee-PRO ZB module, the XBee wall router is fully interoperable with other XBee ZB devices, including XBee modules, adapters, sensors and gateways. XBee products are part of Digi's Drop-in Networking family of solutions, offering users seamless wireless communication between devices. XBee adaptors deliver wireless connectivity to electronic devices in wired networks. XBee sensors provide real-time environmental information from the deployment area. ConnectPort X gateways enable users to access and configure remote devices in a network.
Read more
| North America: | International: | ||
|
XBee-PRO ZB Wall Router, US Power Plug
View details |
XR-Z14-CW1P1 |
Not Applicable |
 Contact Us |
| XBee-PRO ZB Wall Router | North America: | International: | |
| XBee-PRO ZB Wall Router, US Power Plug View details |
XR-Z14-CW1P1 |
Not Applicable |
Contact Us |
| XBee-PRO ZB Wall Router, EU Power Plug View details |
Not Applicable |
XR-Z14-CW1P2 |
Contact Us |
| XBee-PRO ZB Wall Router, UK Power Plug View details |
Not Applicable |
XR-Z14-CW1P3 |
Contact Us |
| XBee-PRO ZB Wall Router, Australia Power Plug View details |
Not Applicable |
XR-Z14-CW1P4 |
Contact Us |
| XBee-PRO ZB Wall Router, Japan Power Plug View details |
Not Applicable |
XR-Z14-CW1P5 |
Contact Us |
| Specifications | XBee-PRO® ZB Wall Router |
| Performance | |
| RF Data Rate | 250 Kbps |
| Indoor/Urban Range | Up to 300 ft (90 m)/200 ft (60 m) Int'l variants |
| Outdoor/RF Line-of-Sight Range | Up to 1 mile (1.6 km)/2500 ft (750 m) Int'l variants |
| Transmit Power | 50 mW (+17 dBm)/10mW (+10 dBm) Int'l variants |
| Receiver Sensitivity (1% PER) | -102 dBm |
| Features | |
| Interfaces | Network interoperable with ZigBee PRO Feature Set devices |
| Frequency Band | 2.4 GHz (ISM) |
| LEDs | Power: Solid when external power is supplied Associate: Blinks when unit is connected and associated to an RF Network |
| Push Button | Device reset, configuration reset to factory defaults, identification/commissioning mode |
| Antenna Options | Internal |
| Locking Mechanism | Unit secures to power outlet using center outlet screw (U.S. only) |
| Integrated Temperature & Light Sensor | |
| Temperature Sensor | Range: -20° C to +70° C (-4° F to +158° F) Accuracy: +/- 2° C |
| Ambient Light Sensor | Range of spectral bandwidth: 360 to 970 nm (similar to human eye) Wavelength of peak sensitivity: 570 nm |
| General | |
| Dimensions (L x W x H) | 2.87 in x 1.97 in x 1.37 in (7.30 cm x 5.00 cm x 3.50 cm) |
| Weight | 2.50 oz (70.87 g) |
| Power Input | Universal AC input (85VAC to 265VAC) |
| Environment (Temperature/Lux) | 0° C to +70° C (32° F to +158° F; sub 1200 lux) |
| Relative Humidity | 5% to 95% (non-condensing) |
| Regulatory Approvals | |
| FCC (USA) | Yes |
| IC (Canada) | Yes |
| CE/ETSI (Europe) | Yes, Int'l variant |
| C-TICK (Australia) | Yes |
| Telec (Japan) | Yes, Int'l variant |
