ConnectPort® X2 for Smart Energy
ZigBee Smart Energy enabled IP gateway
- Full certification of ZigBee Alliance Smart Energy Public Application Profile 1.0 & 1.1
- 10/100 Ethernet for connecting to home Internet router
- Enables the Home Area Network (HAN) and additional Smart Energy products such as Programmable Communicating Thermostat (PCT) and In-Home Display (IHD) products available from many manufacturers
- Uses Digi-hosted iDigi® Device Cloud™ to manage connectivity, configuration and software upgrades
- Versions to support stand-alone Smart Energy networks and Smart Energy metering systems
- Available iDigi Application Development Services
The ConnectPort X2 Gateway for Smart Energy provides a low-cost connection between a Home Area Network (HAN) and remote web applications such as Digi's Smartlee™ application for iPhone and Android, or utility hosted websites designed for customer engagement.
Intended to share the connection of a homeowner's broadband Internet router, the gateway provides near real-time energy data access and control capabilities based on the Smart Energy devices enabled in the customer's home, such as a Programmable Communicating Thermostats (PCTs), In-Home Displays (IHDs), and Smart Energy utility meters.
Certified to the ZigBee Alliance Smart Energy Public Application Profile 1.1 and backwards compatible with 1.0, the gateway is interoperable with other certified Smart Energy devices. The gateway's connectivity, configuration and software upgrades are all easily managed by the iDigi Device Cloud service, a subscription supported service hosted by Digi.
Two configurations of the gateway are available for purchase. The Coordinator version is intended for stand-alone Smart Energy networks that do not have smart meters present. The Router version is configured to connect and read the smart metering system which has been installed at the site.
Read more
Featured Models/Part Numbers
| North America: | International: | ||
|
ConnectPort X2 - Commercial with Smart Energy and Antennas Included with Power Supply
View details |
X2-SE1-EC-A |
X2-SE1-EC-W |
 Contact Us |
|
ConnectPort X2 - Commercial with Smart Energy and Antennas Included with Power Supply
View details |
X2-SE4-EC-A |
X2-SE4-EC-W |
Contact Us |
| Gateways | North America: | International: | |
| ConnectPort X2 - Commercial with Smart Energy and Antennas Included with Power Supply View details |
X2-SE1-EC-A |
X2-SE1-EC-W |
Contact Us |
| ConnectPort X2 - Commercial with Smart Energy and Antennas Included with Power Supply View details |
X2-SE4-EC-A |
X2-SE4-EC-W |
Contact Us |
| Smart Grid Now Bundle 25-pack (formerly X2-SE4-EC-A-BNDL25) View details |
X2-SE4-BD25 |
Not Applicable |
Contact Us |
| Starter Kits | North America: | International: | |
| ConnectPort X2 for Smart Energy Starter Kit (for use WITHOUT smart metering systems) View details |
XK-SE1-EC-A |
XK-SE1-EC-W |
Contact Us |
| Specifications | ConnectPort® X2 for Smart Energy |
| General | |
| Management | HTTP/HTTPS web interface, Password access control, IP service port control, Optional secure enterprise management via iDigi® |
| Protocols | UDP/TCP, DHCP, SNMPv1 |
| LEDs | Ethernet status, Power, ZigBee link/activity |
| Security | SSL tunnels |
| ZigBee | XBee-PRO® 80 mW (+19.1 dBm, including 2.1 dBi antenna) / Int'l 10 mW (+10 dBm) |
| Dimensions (L x W x H) |
2.81 in x 2.74 in x 1.30 in (7.14 cm x 6.96 cm x 3.30 cm) |
| Weight | 0.20 lb (0.09 kg) |
| Development | |
| ZigBee Public Application Profile | Smart Energy |
| Python Version | 2.4.3 |
| Memory (User-available memory varies by firmware and OS version) | 8 MB RAM, 4 MB Flash |
| Ethernet | |
| Ports | 1 RJ-45 port |
| Physical Layer | 10/100Base-T |
| Data Rate | 10/100 Mbps (auto-sensing) |
| Mode | Full or half duplex (auto-sensing) |
| Power Requirements | |
| Power Input | 5 VDC |
| Power Supply | 5 VDC power supply with barrel connector included |
| Power Consumption | Idle: 1.2 W, Max: 3.4 W |
| Surge Protection (with included power supply) | 4 kV burst (EFT) per-4-4, 2 kV surge per EN61000-4 |
| Environmental | |
| Operating Temperature | -30° C to +70° C (-22° F to +158° F) |
| Relative Humidity | 5% to 95% (non-condensing) |
| Ethernet Isolation | 1500VAC min per IEEE802.3/ANSI X3.263 |
| Regulatory Approvals | |
| Safety | EN60950 |
| Emissions/Immunity | CE, FCC Part 15 (Class B), IC, ETSI, C-TICK, Telec |
Using Your Starter Kit: Start Here
- Step 1: Download and read the Quick Start Guide
- Step 2: Download and read the User’s Manual
- Step 3: Download USB Driver (for using your XStick with the Starter Kit)
- Step 4: Download Digi Device Discovery Application
- Step 5: Download In-Premise Display/Meter Simulator
- Step 6: Register at iDigi.com for the following:
- Free developer sandbox account
- iDigi Web Services Getting Started Guide
- iDigi.com Web Services and Device Management Overview
Python Programming Resources
Product Datasheets
Other
- White paper: How the Smart Grid will energize the world
- Wireless routers and gateways feature comparison
- iDigi eEcosystem
Industry Standards
Support Documentation
- Mechanical drawings for XBee / XBee Pro OEM RF Modules
- XBee RPSMA Variant Mechanical Drawing
- X-CTU Configuration & Test Utility Software User Guide
- iDigi Web Services and Programming Guide
- Users Guide: iDigi platform
- Product Manual: XBee / XBee-PRO for Smart Energy RF Modules
- Command Reference: Digi Connect Family
- Remote Command Interface (RCI) Specification
- Quick Start Guide: ConnectPort X2 for Smart Energy
- Quick Start Guide: Smart Grid Now ERT Bundle
- Users Guide: Smart Energy Framework
- Python Programmers Guide
- Customization and Integration Guide: Digi Connect Family
- Device Partners Developers Guide: Digi X-Grid
- Application Partners Developers Guide: Digi X-Grid
- Application Guide: How to Perform a Range Test
- Application Guide: Creating a Smart Energy Device Using Digi XBee / XBee-PRO Smart Energy RF Modules
