Home  >  Products   >  Embedded Wireless and Wired Solutions   >  Solutions on Module   >  Specialty Modules   >  Satellite Connectivity   >  Satellite Modems   >  Digi m10

Digi m10™

Compact satellite modem

  • Global LEO satellite coverage (no blockage)
  • Simple serial interface for host communication
  • Extremely compact module form factor
  • Very low transmit and receive power consumption
  • Industrial operating temperature and shock/vibration
  • Product brief

The Digi m10 satellite modem provides worldwide satellite data transmit and receive capabilities for a wide variety of asset-tracking and industrial remote communications. Operating on the ORBCOMM low-earth orbit (LEO) satellite network, it is designed to enable Machine-to-Machine (M2M) communication with virtually unlimited global coverage and no blockage.

Built on Digi's own patented mixed signal chip designed and tailored for satellite applications, the Digi m10 module is the perfect solution for low- and high-volume applications. It offers quick and simple product design integration through its integrated serial UART interface. With full support for industrial operating temperature and operational shock/vibration specifications exceeding SAE J1455, it is the ideal choice for reliable and highly cost-efficient satellite connectivity in even the most demanding application.

The Digi m10 JumpStart Kit provides a complete setup for quick product evaluation and development purposes. It offers an RS-232 and USB port, and includes antenna, a Windows-based Satellite Dashboard application, documentation, and free 90-day limited ORBCOMM connectivity right out of the box.

Read more

Featured Models/Part Numbers

  North America: International:  
Digi JumpStart Kit for the Digi m10 Satellite Modem
View details 
DG-M10-KIT
DG-M10-KIT

Contact Us
 Bulk part numbers available. Please contact us.
Development Kits North America: International:  
Digi JumpStart Kit for the Digi m10 Satellite Modem
View details 
DG-M10-KIT
DG-M10-KIT

Contact Us
Modules North America: International:  
Digi m10 Satellite Modem, single-pack, without antenna
View details 
DG-M10
DG-M10

Contact Us
Host Interface
Header 14-pin socket, 1 mm pitch 
(Samtec P/N MLE-107-01-G-DV-K)
Serial Port UART (3.3V TTL), 2-wire, with modem power on/ off
control option through DTR signal
Wake Trigger Satellite Available (SA), Data Available (DA)
Satellite Communications
Antenna Connector MMCX male connector (50 Ω)
Minimum Detectable Signal -120 dBm (typical)
Transmit Power 5W nominal
Frequencies TX: 148-150.05 MHz
RX: 137-138 MHz
Power Requirements
Input Voltage +9 to 18VDC
Transmit Current 1.5 A max @ +12VDC
Receive Current 60 mA max @ +12VDC
Mechanical
Dimensions (L x W x H) 2.95 in x 1.81 in x 0.52 in (7.49 cm x 4.60 cm x 1.32 cm)
Environmental
Operating Temperature -40° C to +85° C (-40° F to +185° F)
Relative Humidity 0% to 95% (non-condensing)
Shock (Operational) Exceeds SAE J1455 levels
Vibration (Operational) Exceeds SAE J1455 levels
Radiated Emissions EN300 832, EN301-721
Regulatory Approvals US (FCC), EU (CE), Australia/New Zealand (C-Tick), Canada (IC) - pending, Japan (Telec) - pending
Your M2M Expert™for Businessfor Developers
Contact Us
Phone
Email
Chat
Feedback
Newsletter SignupYouTubeGoogle+FacebookCopyright © 1996-2013 Digi International Inc. All rights reserved. Legal