XBee-PRO® 802.15.4 RF Modems
XBee-PRO stand-alone 802.15.4 RF modem
- ISM 2.4 GHz operating frequency
- 50 mW (+17 dBm) power output (up to 1 mile range)
- RS-232 and USB interface options
- Industrial temperature rating (-40° C to 85° C)
- Advanced mesh networking and low-power modes supported
- Product datasheet
XBee-PRO PKG RF modems provide everything you need for off-the-shelf IEEE 802.15.4 mesh networking connectivity to electronic serial devices. Simply feed data into one modem and the data is transported to the other end of a wireless link. No configuration is necessary for out-of-the-box RF communications. The modem’s default configuration supports a wide range of data system applications. Advanced configurations can be implemented using simple AT commands or API
| North America: | International: | ||
|
XBee-PRO PKG, RS-232 with accessories
View details |
XBP24-PKI-001-RA |
XBP24-PKI-001-RA |
![]() Contact us |
|
XBee-PRO PKG, RS-232 without accessories
View details |
XBP24-PKI-001-R |
XBP24-PKI-001-R |
![]() Contact us |
|
XBee-PRO PKG, USB with accessories
View details |
XBP24-PKC-001-UA |
XBP24-PKC-001-UA |
![]() Contact us |
|
XBee-PRO PKG, USB without accessories
View details |
XBP24-PKC-001-U |
XBP24-PKC-001-U |
![]() Contact us |
- Performance
- Networking & Security
- Antenna
- Certifications (partial list)
- Power Requirements
- Physical Properties
Performance
- Indoor/Urban range (w/ 2.1 dB dipole antenna): Up to 300 ft. (100 m)
- Outdoor RF line-of-sight range (w/ 2.1 dB dipole antenna): Up to 1 mile (1.6 km)
- Transmit power output: 60 mW (18 dBm)*, 100 mW (20 dBm) EIRP*
- Receiver sensitivity: -100 dBm (1% PER (Packet Error Rate))
- Interface data rate (software selectable): 1200 - 115200 bps (non-standard baud rates also supported)
- RF data rate: 250,000 bps
Networking & Security
- Frequency range: ISM 2.4 GHz
- Spread spectrum: DSSS (Direct Sequence Spread Spectrum)
- Modulation: OQPSK (Offset Quadrature Phase Shift Keying)
- Supported network topologies: Peer-to-peer (no master/slave dependencies), Point-to-point, Point-to-multipoint & Mesh (coming soon)
- Number of channels (software selectable): 12 direct sequence channels
- Filtration options: PAN ID, Channel & Destination/Source Addresses
Antenna
- Connector options: RPSMA (reverse polarity SMA)
- Impedance: 50 ohms unbalanced
Certifications (partial list)
- United States (FCC Part 15.247): OUR-XBEEPRO
- Industry Canada (IC): 4214A-XBEEPRO
- Europe (EC): ETSI (10 dBm max TX output)
Power Requirements
XBee-PRO PKG-R- Power supply voltage: 5 - 14 VDC
- Transmit current: 300 mA (@ 9V) **
- Receive current: 80 mA
- Power down current: < 6 mA
- Power supply voltage: USB bus power
- Transmit current: 300 mA ***
- Receive current: 90 mA
- Power down current: < 25 mA
Physical Properties
- Size: 4.500 in x 2.750 in x 1.125 in (11.4 cm x 7.0 cm x 2.9 cm)
- Weight: 5.25 oz (150 g)
- Data connection: Female DB-9
- Operating temperature: -40º C to 85º C (Industrial)
- Data connection: USB
- Operating temperature: 0º C to 70º C (Commercial)
* When operating in Europe: XBee-PRO Modems must be configured to operate at a maximum TX power output level of 10 dBm (power output level is set using the PL command). Additionally, European regulations stipulate an EIRP power maximum of 12.86 dBm (19 mW).
** Average current while streaming data (@9600 bps) = 86 mA
*** Average current while streaming data (@9600 bps) = 92 mA
Product Literature
Support Documentation
General Support Documentation:
- Mechanical drawings for XBee / XBee Pro OEM RF Modules
- Mechanical drawings for XBee / XBee Pro OEM RF Modules: RPSMA Variant
- Product manual for XBee Pro PKG-R RS232 RF Modem
- Product Manual: XBee / XBee-PRO 802.15.4 OEM RF Modules
- Quick Start Guide for XBee Pro PKG-R RS232 RF Modem
- XCTU Configuration & Test Utility Software User Guide
Related Links
XBee-PRO PKG RF modems provide everything you need for off-the-shelf IEEE 802.15.4 mesh networking connectivity to electronic serial devices. Simply feed data into one modem and the data is transported to the other end of a wireless link. No configuration is necessary for out-of-the-box RF communications. The modem’s default configuration supports a wide range of data system applications. Advanced configurations can be implemented using simple AT commands or API.
The XBee-PRO yields two- to three-times the range of standard 802.15.4 modems, allowing integrators and end users to cover more ground with fewer devices. For every 6 dB gained in TX power or RX sensitivity, customers can double the range of a wireless link. XBee-PRO modems outperform higher costing modems due in large part to range gained through superior RX sensitivity.
Available in RS-232 (DB-9F) and USB interface options, XBee-PRO modems are ideally suited for remote monitoring of equipment and/or systems and capturing distributed sensor data. They have been deployed in a variety of applications including home and building automation, lighting control, security systems and air quality measurement systems.
Note: When operating in Europe, XBee-PRO modems must be configured to operate at a maximum TX power output level of 10 dBm (power output level is set using the PL command). Additionally, European regulations stipulate an EIRP power maximum of 12.86 dBm (19 mW).






