XBee-PRO® 900 RF Modules
Long-range RF connectivity using multipoint protocol
- No configuration needed for out-of-the-box RF communications
- Common XBee footprint for a variety of RF modules
- Outdoor RF line-of-sight range up to 6 miles (10 km)
- Fast 156 Kbps RF data rate
- Supports sleep modes for increased battery life
- Product datasheet

XBee-PRO 900 embedded RF modules provide extended-range wireless connectivity to end-point devices. Supporting RF line-of-sight distances of up to 6 miles (with high gain antennas), these modules are ideal for extended-range wireless applications requiring low latency and increased data throughput.
Featured Models/Part Numbers
| North America: | International: | ||
|
XBee-PRO DigiMesh 900 Development Kit w/ 4 XBee-PRO Modules
View details |
XBP09-DMDK $299 USD |
Not available |
![]() Contact us |
XBee-PRO 900 hardware note: The XBee-PRO 900 shares hardware with XBee-PRO DigiMesh™ 900. As a result, modules can be “converted” from one platform to another by loading different firmware onto a given module. Contact Digi Support for details.
| Development Kits | North America: | International: | |
|
XBee-PRO DigiMesh 900 Development Kit w/ 4 XBee-PRO Modules
View details |
XBP09-DMDK $299 USD |
Not available |
![]() Contact us |
| XBee-PRO 900 Embedded RF Modules | North America: | International: | |
|
XBee-PRO 900 extended range module w/ wire antenna
View details |
XBP09-DPWIT-156 |
Not available |
![]() Contact us |
|
XBee-PRO 900 extended range module w/ RPSMA connector
View details |
XBP09-DPSIT-156 |
Not available |
![]() Contact us |
|
XBee-PRO 900 extended range module w/ U.FL connector
View details |
XBP09-DPUIT-156 |
Not available |
![]() Contact us |
Performance:
- Power output: 50 mW (+17 dBm)
- Indoor/Urban range: Up to 450 ft (140 m)
- Outdoor/RF line-of-sight range: Up to 1.8 miles (3 km), up to 6 miles (10 km) with high gain antennas
- RF data rate: 156 Kbps
- Interface data rate: Up to 230 Kbps software selectable
- Operating frequency: 900 MHz
- Receiver sensitivity: -100 dBm
Networking:
- Spread Spectrum type: FHSS (Frequency Hopping Spread Spectrum)
- Networking topology: Peer-to-Peer Mesh, point-to-point & point-to-multipoint
- Error handling: Retries & acknowledgements
- Filtration options: PAN ID, Channel, and 64-bit addresses
- Channel capacity: 8 hopping patterns on 12 channels
- Addressing: PAN ID, Channel, and 64-bit addresses
Power:
- Supply voltage:
- XBee-PRO: 3.0 - 3.6 VDC
- XBee footprint recommendation: 3.0 - 3.4 VDC
- Transmit current: 210 mA @ 3.3 V
- Receive current: 80 mA @ 3.3V
- Power-down sleep current: 60 uA @ 3.3V
General
- Frequency band: 902 - 928 MHz
- Interface options: 3V CMOS UART
Physical Properties
- Size: 0.960 in x 1.297 in (2.438 cm x 3.294 cm)
- Weight: 0.10 oz (3g)
- Antenna options: U.FL, Reverse Polarity SMA (RPSMA), or wired whip antenna
- Operating temperature: -40° C to +85° C (industrial)
Certifications
- FCC: Yes
- IC: Yes
- RoHS: Compliant
Related Links
XBee-PRO 900 RF modules are extended range embedded solutions providing wireless end-point connectivity to devices. These modules use a proprietary 900 MHz point-to-multipoint protocol that balances overall RF performance with a fast 156 Kbps data rate to the end node. Supporting RF line-of-sight ranges of up to 6 miles (with high gain antennas), these modules are ideal for extended-range wireless applications requiring low latency and increased data throughput.
As a member of the XBee® family of RF products, these modules are easy-to-use, share a common hardware footprint and are fully interoperable with other XBee products utilizing the same technology. XBee products are part of Digi's unsurpassed range of Drop-in Networking solutions, offering users seamless wireless communication between devices. XBee adapters provide wireless connectivity to electronic devices in wired networks. XBee XTenders provide long-range backhaul and data conversion between 2.4 GHz and 900MHz. ConnectPort™ X gateways enable users to access and configure remote devices in a network.






