XBee® & XBee-PRO® DigiMesh™ 2.4 RF Modules
Wireless connectivity using the DigiMesh protocol
- Dynamic peer-to-peer DigiMesh protocol with sleeping routers
- No configuration needed for out-of-the-box RF communications
- 2.4 GHz globally deployable frequency
- Self-healing and discovery for network stability
- Multiple antenna options for both low power XBee and extended range XBee-PRO
- Product datasheet

XBee & XBee-PRO DigiMesh 2.4 embedded RF modules utilize the peer-to-peer DigiMesh protocol in 2.4 GHz for global deployments. This innovative mesh protocol offers users added network stability through self-healing, self discovery, and dense network operation. With support for sleeping routers, DigiMesh is ideal for power sensetive applications relying upon batteries or power harvesting technology for power.
Featured Models/Part Numbers
| North America: | International: | ||
|
North American/International (except Japan) DigiMesh 2.4 Development Kit w/ 2 XBee and 2 XBee-PRO modules
View details |
XB24-DMDK |
XB24-DMDK |
![]() Contact us |
Compatibility Note:
XBee and XBee-PRO DigiMesh 2.4 Modules are compatible with other devices that use XBee "DigiMesh 2.4" technology. These include ConnectPort X gateways, XBee and XBee-PRO Adapters, and other products when designated with the "DigiMesh 2.4" product name. Devices that do not have the "DigiMesh 2.4" product name, including Digi's line of ZB, DigiMesh 900, and 802.15.4 XBee products are not compatible with XBee and XBee-PRO DigiMesh 2.4 Modules.
| Development Kits | North America: | International: | |
|
North American/International (except Japan) DigiMesh 2.4 Development Kit w/ 2 XBee and 2 XBee-PRO modules
View details |
XB24-DMDK |
XB24-DMDK |
![]() Contact us |
|
Japan DigiMesh 2.4 Development Kit w/ 2 XBee and 2 XBee-PRO modules
View details |
XB24-DMDK-WJ |
![]() Contact us |
|
| XBee & XBee-PRO DigiMesh 2.4 Embedded RF Modules | North America: | International: | |
|
XBee DigiMesh 2.4 low power module w/ U.FL connector
View details |
XB24-DMUIT-250 |
XB24-DMUIT-250 |
![]() Contact us |
|
XBee DigiMesh 2.4 low power module w/ RPSMA connector
View details |
XB24-DMSIT-250 |
XB24-DMSIT-250 |
![]() Contact us |
|
XBee DigiMesh 2.4 low power module w/ wire antenna
View details |
XB24-DMWIT-250 |
XB24-DMWIT-250 |
![]() Contact us |
|
XBee DigiMesh 2.4 low power module w/ chip antenna
View details |
XB24-DMCIT-250 |
XB24-DMCIT-250 |
![]() Contact us |
|
XBee-PRO DigiMesh 2.4 extended range module w/ RPSMA connector
View details |
XBP24-DMSIT-250 |
XBP24-DMSIT-250J |
![]() Contact us |
|
XBee-PRO DigiMesh 2.4 extended range module w/ wire antenna
View details |
XBP24-DMWIT-250 |
XBP24-DMWIT-250J |
![]() Contact us |
|
XBee-PRO DigiMesh 2.4 extended range module w/ U.FL connector
View details |
XBP24-DMUIT-250 |
XBP24-DMUIT-250J |
![]() Contact us |
|
XBee-PRO DigiMesh 2.4 extended range module w/ chip antenna
View details |
XBP24-DMCIT-250 |
XBP24-DMCIT-250J |
![]() Contact us |
| Platform | XBee® DigiMesh™ 2.4 | XBee-PRO® DigiMesh™ 2.4 | XBee-PRO® DigiMesh™ 2.4 (Int'l) |
| Performance | |||
| RF Data Rate | 250 Kbps | ||
| Indoor/Urban Range | 100 ft (30 m) | 300 ft (90 m) | 200 ft (60 m) |
| Outdoor/RF Line-of-Sight Range | 300 ft (90 m) | 1 mile (1.6 km) | 2500 ft (750 m) |
| Transmit Power | 1 mW (+0 dBm) | 63 mW (+18 dBm) | 10 mW (+10 dBm) |
| Receiver Sensitivity (1% PER) | -92 dBm | -100 dBm | |
| Features | |||
| Serial Data Interface | 3.3V CMOS serial UART | ||
| Configuration Method | API or AT commands | ||
| Frequency Band | 2.4 GHz ISM | ||
| Interference Immunity | DSSS | ||
| Serial Data Rate | Up to 115.2 Kbps | ||
| ADC Inputs | Coming in future firmware releases | ||
| Digital I/O | Coming in future firmware releases | ||
| Antenna Options | Wired whip, chip antenna, U.FL connector, RPSMA connector | ||
| Networking & Security | |||
| Encryption | Coming in future firmware releases | ||
| Reliable Packet Delivery | Retries/Acknowledgments | ||
| Addressing Options | PAN ID, channel, 64-bit address | ||
| Channels | 16 | 12 | |
| Power Requirements | |||
| Supply Voltage | 2.8 – 3.4VDC | ||
| Peak Current | 45 mA | 250 mA (Wire, Chip, U.FL), 340 mA (RPSMA) |
150 mA (Wire, Chip, U.FL), 180 mA (RPSMA) |
| Receive Current | 50 mA | 55 mA | |
| Power-Down Current | <10 uA | ||
| Regulatory Approvals | |||
| FCC (USA) | Yes | ||
| IC (Canada) | Yes | ||
| ETSI (Europe) | Yes | ||
| C-TICK (Australia) | Yes | ||
| Telec (Japan) | Yes | No | Yes |
ZigBee Mesh

DigiMesh

Side

Top

Related Links
- Video: XBee & XBee-PRO
- White paper: Wireless mesh networking - ZigBee vs. DigiMesh
- Technology: Learn more about Drop-in Networking
- Chip vs. module
- RF technology selection
- Wireless education center
- Support
XBee & XBee-PRO DigiMesh 2.4 deliver end-point device connectivity with a globally deployable 2.4 GHz transceiver. These modules use the innovative DigiMesh networking protocol. This innovative, peer-to-peer protocol offers users added network stability through self-healing, dense network operation and support for sleeping routers, extending the operational life of battery dependent networks.
XBee modules are ideal for low-power, low-cost applications. XBee-PRO modules are power-amplified versions of XBee modules for extended-range applications. Part of the XBee family of RF products, these modules are easy-to-use, share a common hardware footprint, and are fully interoperable with other XBee products utilizing the same technology. Module users have the ability to substitute one XBee for another with minimal development time and risk.
XBee products are part of Digi's unsurpassed range of rapidly deployable Drop-in Networking solutions. They offer users seamless wireless communication between devices, including adapters and gateways. XBee adapters deliver wireless connectivity to electronic devices in wired networks.
XBee DigiMesh 2.4 hardware note: The XBee and XBee-PRO DigiMesh 2.4 share hardware with the XBee and XBee-PRO 802.15.4 modules. As a result, these modules can be “converted” from one platform to another by loading different firmware onto a given module. Contact Digi Support for details.






