XBee® and XBee-PRO® ZB
ZigBee® embedded SMT RF modules for OEMs
- Interoperability with ZigBee devices from other vendors*
- Firmware upgrades via UART, SPI or over the air
- Advanced configuration options available via simple AT or API commands
- SMT form factor with side Castellations for easy soldering
- Industry leading sleep current of sub 1uA
- Product datasheet
XBee and XBee-PRO ZB embedded SMT RF modules provide cost-effective wireless connectivity to end-point devices in ZigBee mesh networks. They are interoperable with other ZigBee PRO feature set devices, including devices from other vendors*. They require no configuration or additional development; users can have their network up and running in a matter of minutes.
Compatibility Note:
XBee and XBee-PRO ZB Modules are compatible with other devices that use XBee "ZB" technology. These include ConnectPort X gateways, XBee and XBee-PRO Adapters, XBee Wall Routers, XBee Sensors, and other products when designated with the "ZB" product name. Devices that do not have the "ZB" product name, including Digi's line of DigiMesh and 802.15.4 XBee products, are not compatible with XBee and XBee-PRO ZB Modules.
*Network interoperability with ZigBee devices from other vendors requires that the ZigBee Feature Set or ZigBee PRO Feature Set be deployed on all devices. Contact Digi Support for details.
| XBee Modules | North America: | International: | |
|
XBee ZB S2C Non-Programmable (PCB Antenna)
View details |
XB24CZ7PIS-004 |
Contact us
|
|
|
XBee ZB S2C Non-Programmable (U.FL Antenna)
View details |
XB24CZ7UIS-004 |
Contact us
|
|
|
XBee ZB S2C Non-Programmable (RF Pad Antenna)
View details |
XB24CZ7RIS-004 |
Contact us
|
|
| XBee-PRO Modules | North America: | International: | |
XBee-PRO ZB S2C Non-Programmable (PCB Antenna)
View details |
XBP24CZ7PIS-004 |
Contact us
|
|
XBee-PRO ZB S2C Non-Programmable (RF Pad Antenna)
View details |
XBP24CZ7RIS-004 |
Contact us
|
|
XBee-PRO ZB S2C Non-Programmable (U.FL Antenna)
View details |
XBP24CZ7UIS-004 |
Contact us
|
| Platform | XBee® ZB | XBee-PRO® ZB |
| Performance | ||
| RF Data Rate | 250 Kbps | |
| Indoor/Urban Range | 200 ft (60 m) | 300 ft (90 m) |
| Outdoor/RF Line-of-Sight Range | 4000 ft (1200 m) | 2 miles (3200 m) |
| Transmit Power | 3.1 mW (5 dBm) / 6.3 mW(+8 dBm) boost mode | 63 mW (+18 dBm) |
| Receiver Sensitivity (1% PER) | -102 dBm | -101 dBm |
| Features | ||
| Adjustable Power | Yes | |
| Serial Data Interface | UART, SPI | |
| Configuration Method | API or AT commands | |
| Frequency Band | ISM 2.4 GHz | |
| Interference Immunity | DSSS (Direct Sequence Spread Spectrum) | |
| Serial Data Rate | Up to 1 Mbps | |
| ADC Inputs | (4) 12-bit ADC inputs | |
| Digital I/O | Up to 16 configurable GPIO pins depending on module configuration | |
| Antenna Options | PCB (embeded), U.FL and RF PAD | |
| Programmability | Yes, 32k running at 20 MHz (available in programmable variant) | |
| Dimensions (L x W) | 0.87 in x 1.33 in (2.20 cm x 3.40 cm) | |
| Networking & Security | ||
| Encryption | 128-bit AES | |
| Reliable Packet Delivery | Retries/Acknowledgments | |
| Addressing Options | PAN ID and addresses, cluster IDs and endpoints (optional) | |
| Network Channels | 11 - 26 | |
| Network Topologies | Mesh | |
| Power Requirements | ||
| Power Input | 2.1 to 3.6V | 2.7 to 3.6V |
| Power Consumption | (approx) 150 mW at Pout = +8 dBm and 3.3V | 330 mW at Pout = +18 dBm when VCC = 3.3V |
| Transmit Current | 45 mA @ +8 dBm | 100 mA @ +18 dBm |
| Receive Current | 30 mA in boost mode | |
| Power-Down Current | > 1 uA @ 25° C | < 1 uA @ 25° C |
| Sleep Current | 0.3 uA - 0.4 uA | |
| Regulatory Approvals | ||
| FCC (USA) | Yes | |
| IC (Canada) | Yes | |
| ETSI (Europe) | Yes | No |
| C-TICK (Australia) | Yes | |
| TELEC (Japan) | Yes | No |
External Adapters/Modems
Development Kits
Gateways
Embedded Modules
Related Links
XBee and XBee-PRO ZB embedded SMT RF modules provide cost-effective wireless connectivity to end-point devices in ZigBee mesh networks. They are interoperable with other ZigBee PRO feature set devices, including devices from other vendors*. They require no configuration or additional development; users can have their network up and running in a matter of minutes.
Utilizing Surface Mount Technology (SMT), XBee and XBee-PRO ZB modules are ideal for applications in the energy and controls markets where manufacturing efficiencies are critical. The Serial Peripheral Interface (SPI) provides a high-speed interface and optimizes integration with embedded microcontrollers, lowering development costs and reducing time to market.
Digi's unsurpassed offering of Drop-in Networking products provides seamless communication between devices. As a leading-edge wireless connectivity solution provider, Digi is continually expanding the products, features and functions available in this dynamic family of wireless communication products.
*Interoperability requires the ZigBee Feature Set or ZigBee PRO Feature Set to be deployed on all devices. Contact Digi Support for details.
