Home > Products > XBee/RF Solutions > Modems/Adapters > XPress Wireless Ethernet Bridge

XPress™ Wireless Ethernet Bridge

900 MHz Wireless Ethernet Bridge

  • Web interface simplifies configuration and troubleshooting
  • Frequency agility ensures reliable connection between radios
  • Spectrum analyzer for RF interference
  • Outdoor line-of-sight range up to 15 miles
  • FIPS 140-2 and AES encryption provide secure communication
How to Buy

The XPress Wireless Ethernet Bridge replaces costly wiring with a solution that can wirelessly connect industrial PLCs, digital signs, security cameras, access controllers and more. With a range of up to 15 miles, the ability to transmit through as many as 10 standard walls, a 1.5 Mbps data rate, and the added range and capabilities of the 900 MHz band, the easy-to-use, long-range XPress Wireless Ethernet Bridge communicates where Wi-Fi and other wireless data products fall short.

Download datasheetDownload datasheet Add to compareAdd to compare Product supportProduct support Share this productShare this product
RF Professional Services from Digi
On-site services and support for RF solution implementation including site survey, integration, training and troubleshooting.
Specifications XPress™ Wireless Ethernet Bridge
Performance
Indoor/Urban Range Up to 1000 ft (300 m) w/ 2.1 dB dipole antenna
Outdoor/RF Line-of-Sight Range Up to 2 miles (3.2 km) w/ 2.5 dB dipole antenna, Up to 15 miles (24 km) w/ high-gain antenna
Transmit Power Output 125 mW (+21 dBm), 4W EIRP w/ 15 dBi antenna
Throughput Data Rate 935 Kbps
RF Data Rate 1.536 Mbps
Receiver Sensitivity -97 dBm (@10e-4 BER)
Features
Suppported Protocols TCP/IP, Rockwell (RSLinx EtherNet/IP, CSP), Modbus/TCP
Browser Management Tools QoS statistics, Network settings, Spectrum analyzer, Firmware upgrading
Data Connection 10/100Base-T RJ-45, Auto MDI/MDIX
Interference Immunity DSSS (Direct Sequence Spread Spectrum)
Encryption 128-bit AES, FIPS 197/NIST certified (optional FIPS 140-2)
Radio Channels/Bandwidth 12 channels (6 in international version) with 2.0833 MHz spacing and 1.75 MHz occupied bandwidth
Frequency Band ISM 902-928 MHz (915-928 MHz international version)
Frequency Agility Radio channel automatically selected and adaptively optimized
Manual Frequency Mode Channel selected with DIP switch or web browser interface
Status LEDs Power, RF TX/RX, Ethernet link, channel, link quality
Error-Correction Technique Sub-block error detection and retransmission
Adjacent-Band Rejection >60 dB - SAW receiver filter attenuates cellular and pager interference
Regulator Type Switching regulator
Antenna Connector RF RPTNC female
PoE (Power over Ethernet) Proprietary system included
Subscriber Units Up to 16 active (63 total) per access point
Serial Number Based Mating Protocol Yes
Dimensions (L x W x H) 7.9 in x 3.6 in x 2.4 in (20.0 cm x 9.1 cm x 6.1 cm)
Weight 415 grams
Power Requirements
Power Consumption Transmit: 1.7W, Receive: 0.8W
Transmit Current Draw 9 - 48 VDC Power over Ethernet, 175 mA at 9 VDC, 140 mA at 12 VDC, 35 mA at 48VDC
Power Connector Use PoE injector, power jack P5-2.1 mm center positive
Environmental
Operating Temperature Radio/Enclosure: -40° C to +70° C; POE injector: -40° C to +85° C; Power supply: 0° C to +40° C
Weatherproofing The XPress Wireless Ethernet Bridge is IP65 rated. The PoE injector and power supply are not weatherproof, and should be installed indoors.
Regulatory Approvals
FCC (USA) Yes
IC (Canada) Yes
ETSI (Europe) N/A
C-TICK (Australia) Yes
Telec (Japan) N/A

Firmware

Utilities

Recently Viewed