Digi International Support Forum

Replies: 3

smadam813

Posts: 2
Registered: Nov 6, 2009

AnywhereUSB Driver Issues - Not System32 Issue
Posted: Nov 6, 2009 12:45 PM

I have installed the AnywhereUSB on my network and have set up its IP and what not. I connect to the VM after I installed the drivers and it brings up a install hardware wizard. I proceed, but it states that no driver can be found. (This is for the hub) I then go back through the wizard and choose my own device and go to the manufacture Digi Int. and select the hub driver manually. It installs and then prompts me for driver installation of a host controller. Once again I proceed and it states no driver can be found. The issue is, when I go to manually select a driver, there is no drivers in the list for Digi Int. Can anyone supply me with the host controller driver for Windows 2000 or tell me what I am doing wrong?

jeremym

Posts: 660
From: Austin, TX
Registered: Jun 7, 2006

Re: AnywhereUSB Driver Issues - Not System32 Issue
Posted: Nov 6, 2009 2:11 PM

Which model AnywhereUSB? The /2, the /5, or the TS-44?

smadam813

Posts: 2
Registered: Nov 6, 2009

Re: AnywhereUSB Driver Issues - Not System32 Issue
Posted: Nov 11, 2009 8:08 AM

This is the TS-44

jeremym

Posts: 660
From: Austin, TX
Registered: Jun 7, 2006

Re: AnywhereUSB Driver Issues - Not System32 Issue
Posted: Nov 11, 2009 8:57 AM

That model AnywhereUSB is incompatible with Windows 2000, so that's the source of the problem.

You need to use XP, 2003, 2008, or Vista for the OS.