Home > Support > Knowledge Base

Knowledge Base

All

 

There are 5 search results for "" in the installation category
Where can I locate Legacy drivers?
Category: Miscellaneous, Configuration, Hardware, Installation, Troubleshooting
Please visit the following page ftp://digiftp.digi.com/support_archive
USB Drivers for Digi radios and modems: XBee, XTend, and XStream
Category: Installation
Link to the current version of the Digi RF Driver Installer for all versions of Windows: ftp://ftp1.digi.com/support/driver/Digi_USB_RF_Drivers.exe For Linux and Macintosh OS X, it's highly recommended to download and install the drivers directly...
Removing or changing unused COM Ports from Windows.
Category: Miscellaneous, Installation, Hardware, Configuration
Whenever a new USB serial device is plugged into a PC, Windows will assign the device a new, unique COM Port number. This will even happen if the same device is plugged into a different USB port. If you are prototyping or experimenting with differ...
How to find out the date code and manufacturing location information of Digi Products.
Category: Configuration, Hardware, Installation, Miscellaneous
Depending on the location the units are built effects the orientation, linked below is the date code from USA or Thailand.  The date code is 4 digits, 2 digit year and 2 digit week (YYWW) so in these examples the 26th week of 2012. Thailand M...
Optimizing USB to Serial Port Settings 
Category: Configuration, Hardware, Installation, Miscellaneous, Troubleshooting
Digi interface boards and USB adapters use an FTDI Chip for the USB to serial conversion. The default configuration for FTDI's drivers are optimized for high speed serial devices. Digi RF radios operate at lower baud rates than are optimal for these ...
Contact a Digi expert and get started today! CONTACT US

Desktop Site