Home > Support > Knowledge Base

Knowledge Base

All

 

There are 9 search results for "" in the hardware category
Where can I locate Legacy drivers?
Category: Miscellaneous, Configuration, Hardware, Installation, Troubleshooting
Please visit the following page ftp://digiftp.digi.com/support_archive
Why do some of my XBee Network devices say "unspecified" under Product Type, but others have the correct Product Type listed?
Category: Configuration, Hardware
The "Product Type" column on the Configuration > XBee Network and Administration > System Information > XBee Network pages of the ConnectPort X gateways WebUI is a user-configurable field which can be used to help identify various device typ...
What values can I use in XCTU for the DD (Device Type Identifier) parameter?
Category: Configuration, Hardware
The XBee / XBee-PRO DD parameter is the Device Type Identifier field. The DD field is a 4-byte hex string, consisting of an upper and lower word, which when put together result in a meaningful designation such as "RS-232 Adapter" or "X8 Gateway". Th...
Customer cannot interact with Programmable XBee using XCTU
Category: Hardware, Troubleshooting
Your programmable XBee needs to be put into bypass mode before the XCTU can talk to the Ember radio on the module.  Programmable XBees have two processors, a Freescale processor which can be programmed with the CodeWarrior compiler and they...
Removing or changing unused COM Ports from Windows.
Category: Miscellaneous, Installation, Hardware, Configuration
Whenever a new USB serial device is plugged into a PC, Windows will assign the device a new, unique COM Port number. This will even happen if the same device is plugged into a different USB port. If you are prototyping or experimenting with differ...
How to find out the date code and manufacturing location information of Digi Products.
Category: Configuration, Hardware, Installation, Miscellaneous
Depending on the location the units are built effects the orientation, linked below is the date code from USA or Thailand.  The date code is 4 digits, 2 digit year and 2 digit week (YYWW) so in these examples the 26th week of 2012. Thailand M...
Recovery procedure for Digi RF products
Category: Configuration, Hardware, Troubleshooting
This article is an all-inclusive guide for recovering a Digi RF product that is in an unresponsive state. Please click on the type of radio you are experiencing problems with to go to the appropriate section: • General troubleshooting...
Optimizing USB to Serial Port Settings 
Category: Configuration, Hardware, Installation, Miscellaneous, Troubleshooting
Digi interface boards and USB adapters use an FTDI Chip for the USB to serial conversion. The default configuration for FTDI's drivers are optimized for high speed serial devices. Digi RF radios operate at lower baud rates than are optimal for these ...
Digital and Analog Sampling Using XBee Radios
Category: Configuration, Hardware, Miscellaneous
  XBee radios have multiple I/O lines that can be used to gather Digital or Analog data, and then transmit that data to another XBee for interpretation. Because sample data is always provided in an API format, it can be very intimidating and...
Contact a Digi expert and get started today! CONTACT US

Desktop Site