Home > Support > Knowledge Base

Knowledge Base

All

 

There are 21 search results for "" in the miscellaneous category
Where can I locate Legacy drivers?
Category: Miscellaneous, Configuration, Hardware, Installation, Troubleshooting
Please visit the following page ftp://digiftp.digi.com/support_archive
Using Digi XTend, XStream, XCite, XBee radio modems for internet access
Category: Miscellaneous
The Digi XTend, XStream, XCite, XBee radio modems specialize in long range, low data rate, serial data. Our radio modems are used in point-to-point and point-to-multipoint industrial networks to transfer serial data at rates of up to 115200 bits per ...
Vibration and shock testing and performance
Category: Hardware, Installation, Miscellaneous
We have had several inquiries about how well the Digi radio modems perform in high vibration environments. Digi has not conducted any vibration analysis tests on our own products. However, our customers have done extensive testing lab and field testi...
Receiver Noise Figure, Receiver IF Bandwidth, Signal to Noise Ratio
Category: Miscellaneous
Does Digi publish the following information for its radios:   Receiver Noise Figure Receiver IF Bandwidth Signal To Noise Ratio Receive Power   These specifications are generally requested when using software ...
Is RSSI the best indication of link quality?
Category: Miscellaneous
One thing to keep in mind is that the RSSI is only an indication of the RF energy detected at the antenna port. The power level reported could be artificially high because it may include energy from background noise and interference as well as the...
Use of content from Digi manuals
Category: Miscellaneous
Content from Digi manuals may be used by our OEM customers in their own documentation subject to the following conditions: Clearly state: "Parts of this manual are used by permission of Digi, Inc." Submit a copy of the...
Intrinsic safety certifications
Category: Hardware, Miscellaneous
What information do I need to obtain Intrinsic safety certifications? Digi radio modems have been integrated by a number customers into products that are used in hazardous environments. For electronic equipment to be used in environments with com...
Radio Emission Designation And Modulation Type For Digi RF Radios
Category: Miscellaneous
9XStream/9XCite Modulation Type: FSK Emission Designation: 260KF1D 24XStream Modulation Type: FSK Emission Designation: 400K0F1D 9XTend Modulation Type: FSK (@9600 baud), GFSK (@115200 baud) Emission Designation: 350KF1D (XT09) EmissionD...
Using Port Monitoring Software for Troubleshooting
Category: Miscellaneous, Troubleshooting
Some integrators who start with a working hard-wired application may find they are not successful when substituting the radios for the wired connection. The best troubleshooting approach is to isolate the problem. A good starting point is to ensure t...
Wireless CAN (Controller Area Network)
Category: Miscellaneous
The CAN (Controller Area Network) serial protocol was originally designed to be used for communication between sensors and computers in automotive applications. Since its inception it has grown to be used in a number of different commercial and indus...
RoHS Certificate of Compliance
Category: Miscellaneous
RF Products as of 1 June, 2013 The wireless devices identified in this certificate are in compliance with the European Union Directive 2011/65/EU on the restricted use of certain hazardous substances (RoHS Directive / RoHS II Directive). Based o...
The AT Command Set
Category: Configuration, Miscellaneous
The AT command set, also known as the Hayes command set, was originally developed for use with the Hayes modems in the 1980s. Many modern dialup modems are still based around this standard. The term AT command comes from the use of the ASCII characte...
Using the explicite transmit frame to support ZDOs (ZigBee Device Objects) in the XBee API.
Category: Configuration, Installation, Miscellaneous
The ZigBee Device Profile is a management and discovery service layer supported on all ZigBee devices. Like all other profiles, the ZigBee Device Profile defines a set of clusters that can be used to perform a variety of advanced network management a...
Zigbee Layer Acks: How can I be sure that my zigbee end device got data from my Python application?
Category: Miscellaneous, Troubleshooting
This article explains how to configure a Python application''s socket connection so that it waits to hear back from the zigbee end device before proceeding. This is opposed to normal behavior, which is simply sending the data down to the zigbee layer...
Can I convert an XBee/XBee-PRO ZNET 2.5 or Zigbee Pro featureset (ZB) Module to a Smart Energy (SE) Module?
Category: Hardware, Miscellaneous
Can I convert an XBee/XBee-PRO ZNET 2.5 or Zigbee Pro featureset (ZB) Module to a Smart Energy (SE) Module? Yes, and there is no charge. Download the ZB to Smart Energy (SE) Conversion Kit here. Please contact Support if you have any questions.
Digi API Frame Maker
Category: Configuration, Miscellaneous
The Digi API Frame Maker can be used to generate API packets for use on Digi's wireless networks. Java is required.   Download the Digi API Frame Maker here.
How to find out the date code and manufacturing location information of Digi Products.
Category: Configuration, Hardware, Installation, Miscellaneous
Depending on the location the units are built effects the orientation, linked below is the date code from USA or Thailand.  The date code is 4 digits, 2 digit year and 2 digit week (YYWW) so in these examples the 26th week of 2012. Thailand M...
Maximum payload size for Digi RF radios
Category: Configuration, Miscellaneous, Troubleshooting
When the radio is being used in a transparent (AT) mode, packet size is irrelevant because the data will be fragmented as needed. However, when using API frames, it is important not to exceed the allowable payload size.  Maximum payload size ...
Optimizing USB to Serial Port Settings 
Category: Configuration, Hardware, Installation, Miscellaneous, Troubleshooting
Digi interface boards and USB adapters use an FTDI Chip for the USB to serial conversion. The default configuration for FTDI's drivers are optimized for high speed serial devices. Digi RF radios operate at lower baud rates than are optimal for these ...
Understanding white label on XBee module
Category: Hardware, Configuration, Miscellaneous
  Location of label items will vary by product, and may change over time.
Digital and Analog Sampling Using XBee Radios
Category: Configuration, Hardware, Miscellaneous
  XBee radios have multiple I/O lines that can be used to gather Digital or Analog data, and then transmit that data to another XBee for interpretation. Because sample data is always provided in an API format, it can be very intimidating and...
Contact a Digi expert and get started today! CONTACT US