Home > Support > Knowledge Base

Knowledge Base

All
Configuration: 2 result(s) found
Installation: 2 result(s) found
Hardware: 5 result(s) found
Miscellaneous: 7 result(s) found
Troubleshooting: 3 result(s) found

 

There are 10 search results for ""
Verifying UL (Underwriter Laboratories) certification of Digi products
Category: Miscellaneous
Occasionally we have customers who require vefification of UL (Underwriter Laboratories) certification of Digi products in order to get approval to use our products in their environment. If you look on any of our product labels where it shows the U...
EIA-232 Information
Category: Hardware
DTE vs DCE This is one of the most misunderstood areas of RS-232. DTE stands for Data Terminal Equipment, and DCE stands for Data Circuit-terminating Equipment or Data Communications Equipment. The DTE is typicall...
Recommended Custom Cable Vendors
Category: Miscellaneous
The Whyte Haus 260-484-5666 the.whytehaus@verizon.net Contact: Barb Whyte   Predator Grizzly Cable (503)292-7151 x 1101 CSP, Inc. 763-475-8346 mrannals@csp.com ...
Where can I locate Legacy drivers?
Category: Miscellaneous, Configuration, Hardware, Installation, Troubleshooting
Please visit the following page ftp://digiftp.digi.com/support_archive
What is Digi International doing to comply with the RoHS requirements?
Category: Miscellaneous
Digi International is in the process of preparing to meet the RoHS requiements. For details, please visit this link:  http://www.digi.com/aboutus/environment.jsp  
MISSING ALL COM PORTS IN WINDOWS 2000
Category: Troubleshooting
  Make sure that the system has at least one of it''''''''s native serial ports enabled in the system BIOS. Failure to do this will prevent the Microsoft Serial Driver from loading. The Digi makes use of it and will not be able to load without ...
Reference Guide: Cable specifications for building serial cables
Category: Hardware
Cable Reference Guides: EIA-232 General Information EIA-232 Flow Control Primer EIA-232 Cables: DTE vs. DCE EIA-232 Signal Information EIA-232 Cable Specifications EIA-232 Cable Capacitance vs. Length of Run EIA-232 Signal/Pin Convers...
Errors during installation of I/O Networks drivers on Windows NT
Category: Hardware, Miscellaneous, Troubleshooting
1. Make sure you are using the latest NT installer off the support website and the latest version of the BIOS for your system. 2. Make sure that USB is enabled in the BIOS and that Plug-and-Play is set to NO/OFF/DISABLED. If these steps do not reso...
Use of content from Digi manuals
Category: Miscellaneous
Content from Digi manuals may be used by our OEM customers in their own documentation subject to the following conditions: Clearly state: "Parts of this manual are used by permission of Digi, Inc." Submit a copy of the...
How to find out the date code and manufacturing location information of Digi Products.
Category: Configuration, Hardware, Installation, Miscellaneous
Depending on the location the units are built effects the orientation, linked below is the date code from USA or Thailand.  The date code is 4 digits, 2 digit year and 2 digit week (YYWW) so in these examples the 26th week of 2012. Thailand M...
Contact a Digi expert and get started today! CONTACT US