Home > Support > Knowledge Base

Knowledge Base

All
Configuration: 5 result(s) found
Installation: 6 result(s) found
Hardware: 4 result(s) found
Miscellaneous: 7 result(s) found
Troubleshooting: 6 result(s) found

 

There are 11 search results for ""
How to install and use Wireshark (Ethereal) for Ethernet Packet Sniffing
Category: Installation, Miscellaneous, Troubleshooting
Wireshark Installation and Usage This document was put together to assist in the installation and usage of an Ethernet packet sniffing utility called Wireshark. To install Wireshark you will need to go to http://www.wireshark.org/download.html ...
PINOUT MISMATCH ON CCXP270 EMBEDDED MODULE
Category: Miscellaneous
PROBLEMThe pin numbering on the ccxp270 module does not align with the suggested pin numbering of the Samtec connector. In your datasheet (CCXP270_Hardware_Reference_Manual) on page 92 (Mechanical Dimensions), you have got a design of the bottom view...
Where can I find the CAD files for your embedded modules?
Category: Miscellaneous
We normally don't provide these. Please contact Digi Technical Support with further inquiries 952 912-3456 or www.digi.com/support  
Use of content from Digi manuals
Category: Miscellaneous
Content from Digi manuals may be used by our OEM customers in their own documentation subject to the following conditions: Clearly state: "Parts of this manual are used by permission of Digi, Inc." Submit a copy of the...
How do I program my customized firmware or configuration settings to embedded modules for mass production?
Category: Configuration, Hardware, Miscellaneous
Use Expect/Tcl or python scripts to scan serial output and issue appropriate commands (to serial console) to program your firmware.See: http://www.python.org E.g. under Windows use:http://aspn.activestate.com/ASPN/Downloads/ActiveTcl/ And create ...
Building JFFS2 rootfs fails due to mkfs.jffs2 returns non zero exit code (Aborted). E.g.: /usr/local/DigiEL-5.0/scripts/make_images.sh: line 98: 9723 Aborted mkfs.jffs2 ...
Category: Installation, Troubleshooting
This is a bug in the Linux tool mkfs.jffs2 occuring on some processors/Linux distributions. To fix it, install an updated mkfs.jffs2 binary into your toolchain, e.g. into: /usr/local/LxNETES-2.3/arm-elf/bin/mkfs.jffs2 /targets/yourproject/LxNETES-...
LxNETES-3.2 make xconfig might fail with message like: linux/scripts/kconfig/qconf.h: error: extra qualification ' ConfigSettings::' on member 'readSizes' .. make: *** [xconfig] Error 2
Category: Configuration, Installation, Troubleshooting
Modern Linux distributions use Qt 4.4.3 or higher and don't allow to downgrade (without major problems) to a version which does work with the old "xconfig" of Linux kernel 2.4.22. Workaround: use "make menuconfig" For menuconfig you might ...
Building U-Boot 1.1.3 from LxNETES-3.2 CD according to README fails
Category: Configuration, Installation, Troubleshooting
Error -./build.sh: 5: declare: not found or gzip: stdin: unexpected end of file Summary build.sh uses ´declare´ which is a bash builtin command. However build.sh starts with: #!/bin/sh and works only if /bin/sh is a link to bash on y...
Why do products have an altitude limit?
Category: Hardware, Miscellaneous, Troubleshooting
1 Altitude affects the cooling ability of the device. At higher altitudes, the reduced air pressure reduces the rate at which heat from the device can be dissipated to the surrounding ambient. 2 Products temperature rating assumes use at sea leve...
How to find out the date code and manufacturing location information of Digi Products.
Category: Configuration, Hardware, Installation, Miscellaneous
Depending on the location the units are built effects the orientation, linked below is the date code from USA or Thailand.  The date code is 4 digits, 2 digit year and 2 digit week (YYWW) so in these examples the 26th week of 2012. Thailand M...
uboot tftp transfer is not working on office/work laptop, but works on desktop, why?
Category: Configuration, Hardware, Installation, Troubleshooting
Office laptops usually will have VPN installed. It appears that some VPN Clients will reconfigure MTU value to 1300 bytes, presumably as a requirement of the VPN tunnel or to minimize delays. This means that when using a TFTP server with the opti...
Contact a Digi expert and get started today! CONTACT US