Home > Support > Knowledge Base

Knowledge Base

Configuration: 8 result(s) found
Installation: 6 result(s) found
Hardware: 7 result(s) found
Miscellaneous: 11 result(s) found
Troubleshooting: 8 result(s) found


There are 14 search results for ""
What do the LEDs on my USB product indicate?
Category: Troubleshooting, Hardware, Miscellaneous
Although this information is documented in the respective Installation Guides, here is a summary of what the LED behavior indicates:AnywhereUSB: On all model AnywhereUSBs, the System Status LED should normally blink green. Particular to the (legacy) ...
Where can I locate Legacy drivers?
Category: Miscellaneous, Configuration, Hardware, Installation, Troubleshooting
Please visit the following page ftp://digiftp.digi.com/support_archive
How to install and use Wireshark (Ethereal) for Ethernet Packet Sniffing
Category: Installation, Miscellaneous, Troubleshooting
Wireshark Installation and Usage This document was put together to assist in the installation and usage of an Ethernet packet sniffing utility called Wireshark. To install Wireshark you will need to go to http://www.wireshark.org/download.html ...
What is the difference between the Remote Access, Terminal Emulator modes?
Category: Configuration, Installation, Miscellaneous
Last updated 06-02-2009 Remote Access: In this mode, the ConnectPort Display plays the role of a thin client, providing remote access to a computer over an IP network. Communication can take place across a LAN, WAN, or VPN network, or even across the...
Respawn Errors Seen When Rebooting Linux RealPort Server
Category: Configuration, Troubleshooting
Adding "sleep 10" towards the end of the /etc/init.d/dgrp_daemon file will help to prevent the RealPort daemons from starting ahead of /etc/inittab.
General tips for troubleshooting the ConnectPort Display M22
Category: Configuration, Installation, Miscellaneous, Troubleshooting
1. If you look at the front panel of the unit, the System Status LED should blink green (slowly) and the two USB port LEDs should be solid green. You should see this behavior after the unit has booted, which takes about 15 seconds, ...
ConnectPort Display M22 CE FAQ
Category: Hardware, Miscellaneous
What kind of CPU does the CPD M22 CE have? MIPS32. Windows CE may call it MIPS-II. Which version of Windows CE is installed? Windows CE 5.00 What is the latest EOS (Embedded Operating System) that I should be running on my unit? v...
Summary of the differences between the ConnectPort Display models
Category: Hardware, Miscellaneous
Digi offers three ConnectPort Display models: 1. ConnectPort Display (P/N 301-1180-01). The ConnectPort Display is primarily intended to remotely access a PC over an IP network. In this scenario, we call the PC the "host PC". Remote access is a...
Bluescreen when installing RealPort on a system running AVG Anti-virus, pointing to the ''avgtdix.sys'' file as the cause of the problem.
Category: Miscellaneous, Troubleshooting
Solution: Disable AVG from the system until RealPort is installed. How to Resolve: Open up Device Manager and uninstall any failed installs from the "Multi-port serial adapters" section, by right-clicking the device and clicking "Uninstall". ...
What kinds of USB devices are compatible with the ConnectPort Display?
Category: Configuration, Hardware, Installation, Miscellaneous, Troubleshooting
HID (Human Interface Device) style devices and USB hubs are compatible with all model ConnectPort Displays. Devices that typically fall into the HID category are simple input devices such as USB mice, keyboards, barcode scanners, and magnetic card st...
I need to Telnet to my Digi network-connected product. Where do I get Telnet and how can I capture the output of my Telnet session?
Category: Configuration
Why Telnet to the CommandLine Interface (CLI)? While the Web User Interface (WebUI) of Digi network products is a convenient configuration interface, it typically only covers the most common options. The CLI on the other hand allows access to ...
Why do products have an altitude limit?
Category: Hardware, Miscellaneous, Troubleshooting
1 Altitude affects the cooling ability of the device. At higher altitudes, the reduced air pressure reduces the rate at which heat from the device can be dissipated to the surrounding ambient. 2 Products temperature rating assumes use at sea leve...
How to find out the date code and manufacturing location information of Digi Products.
Category: Configuration, Hardware, Installation, Miscellaneous
Depending on the location the units are built effects the orientation, linked below is the date code from USA or Thailand.  The date code is 4 digits, 2 digit year and 2 digit week (YYWW) so in these examples the 26th week of 2012. Thailand M...
Getting Device Cloud Connected:  Configuring Digi Connect and ConnectPort Gateways for Device Cloudconnection - Web User Interface (WebUI) method
Category: Configuration
Changing a Gateway's Device Cloud Remote Configuration settings from the Device Cloud: The easiest way to change the Device Cloud configuration of supported Gateway is from the Device Cloud UI Properties page of a Gateway which is already&nbs...
Contact a Digi expert and get started today! CONTACT US

Desktop Site