Knowledge Base

All
Configuration: 5 result(s) found
Installation: 4 result(s) found
Hardware: 4 result(s) found
Miscellaneous: 8 result(s) found
Troubleshooting: 7 result(s) found

 

There are 12 search results for ""
Where can I locate Legacy drivers?
Category: Miscellaneous, Configuration, Hardware, Installation, Troubleshooting
Please visit the following page ftp://digiftp.digi.com/support_archive
How to install and use Wireshark (Ethereal) for Ethernet Packet Sniffing
Category: Installation, Miscellaneous, Troubleshooting
Wireshark Installation and Usage This document was put together to assist in the installation and usage of an Ethernet packet sniffing utility called Wireshark. To install Wireshark you will need to go to http://www.wireshark.org/download.html ...
Use of content from Digi manuals
Category: Miscellaneous
Content from Digi manuals may be used by our OEM customers in their own documentation subject to the following conditions: Clearly state: "Parts of this manual are used by permission of Digi, Inc." Submit a copy of the...
Digi Python Resource page
Category: Miscellaneous, Installation
This article is not meant to answer python questions per se, but to instead point our customers to some of the places where those answers can be found. As such, it is an article of useful links for the aspiring or adept python developer, who wishes t...
Configuring and Troubleshooting a Digi Connect or ConnectPort for Connection to the Device Cloud
Category: Configuration, Troubleshooting
  This document discusses how to setup your Digi Connect or ConnectPort product to connect to the Device Cloud Platform.  This document assumes the user has set up the IP address of their Digi product, is familiar with, and has acces...
XBee & RF Module Feature Comparison Matrix
Category: Hardware
What: XBee & RF Module Feature Comparison Matrix Why: One stop shopping to quickly make a module selection and to understand feature differences. Where: On all Digi.com RF Module product pages and directly here - XBee & RF Module ...
Why do products have an altitude limit?
Category: Hardware, Miscellaneous, Troubleshooting
1 Altitude affects the cooling ability of the device. At higher altitudes, the reduced air pressure reduces the rate at which heat from the device can be dissipated to the surrounding ambient. 2 Products temperature rating assumes use at sea leve...
When building a DIA project in the Digi ESP development tool, the build seems to finish successfully, but while running the project on the target device (Connect Core 3G for example), you may get the message "Can't find dia.zip file".
Category: Troubleshooting
This is a known bug in the Digi ESP that will be corrected in the future. It can be addressed with the procedure below. This document assumes the customer is working with and has installed the Digi ESP development tool to a windows machine. This to...
How many TCP/UDP Sockets can be used on Digi X-Trak 3 and ConnectPort X3?
Category: Configuration
In general there are 31 TCP/UDP Sockets are available for communication on ConnectPort X3 as well as Digi X-Trak 3. But in the practical scenario, following maximum number of TCP/UDP Ports can be handled simultaneously. ·   &...
How to find out the date code and manufacturing location information of Digi Products.
Category: Configuration, Hardware, Installation, Miscellaneous
Depending on the location the units are built effects the orientation, linked below is the date code from USA or Thailand.  The date code is 4 digits, 2 digit year and 2 digit week (YYWW) so in these examples the 26th week of 2012. Thailand M...
Device Cloud Accounts: Developer Edition and Subscribed Edition Protocols
Category: Miscellaneous, Troubleshooting
In order to provide the most available and secure platform to our Device Cloud users, we have a number of protocols in place for both free and subscriber accounts to safeguard against "rogue" devices which may affect service. Some of these protocols ...
'No module named OS' error in Digi ESP for python
Category: Configuration, Miscellaneous, Troubleshooting
When Python Standard Library is not loaded on digi devices running NDS firmware, you will get the error  no module named OS, Follow the below steps to overcome this error. Download the file Python Standard Library for ...
Your M2M Expert®for Businessfor Developers
Contact Us
Phone
Email
Chat
Feedback
Newsletter SignupYouTubeGoogle+FacebookCopyright © 1996-2014 Digi International Inc. All rights reserved. Legal