Home > Support > Knowledge Base

Knowledge Base

All
Configuration: 9 result(s) found
Installation: 5 result(s) found
Hardware: 4 result(s) found
Miscellaneous: 5 result(s) found
Troubleshooting: 9 result(s) found

 

There are 16 search results for ""
Where can I locate Legacy drivers?
Category: Miscellaneous, Configuration, Hardware, Installation, Troubleshooting
Please visit the following page ftp://digiftp.digi.com/support_archive
Device Discovery Troubleshooting Tips
Category: Installation, Troubleshooting
INTRODUCTION This document contains a list of tips that will help people through the trouble of detecting most Digi Ethernet or Wi-Fi devices. Some examples are the Digi Connect ME, EM, SP, WiME, WiEM, WiSP -S modules running Plug n' Play firmware...
Use of content from Digi manuals
Category: Miscellaneous
Content from Digi manuals may be used by our OEM customers in their own documentation subject to the following conditions: Clearly state: "Parts of this manual are used by permission of Digi, Inc." Submit a copy of the...
Digi XBee, RF Gateway and Python Development Resource page
Category: Miscellaneous
This article contains a number of links useful for development with Digi's RF Gateway and XBee productline.  Digi RF Gateways have an inherent Python interpreter, so a key focus has been made on available Python-related content, although we've a...
Configuring and Troubleshooting a Digi Connect or ConnectPort for Connection to the Device Cloud
Category: Configuration, Troubleshooting
  This document discusses how to setup your Digi Connect or ConnectPort product to connect to the Device Cloud Platform.  This document assumes the user has set up the IP address of their Digi product, is familiar with, and has acces...
I need to Telnet to my Digi network-connected product. Where do I get Telnet and how can I capture the output of my Telnet session?
Category: Configuration
Why Telnet to the CommandLine Interface (CLI)? While the Web User Interface (WebUI) of Digi network products is a convenient configuration interface, it typically only covers the most common options. The CLI on the other hand allows access to ...
Why do products have an altitude limit?
Category: Hardware, Miscellaneous, Troubleshooting
1 Altitude affects the cooling ability of the device. At higher altitudes, the reduced air pressure reduces the rate at which heat from the device can be dissipated to the surrounding ambient. 2 Products temperature rating assumes use at sea leve...
Performing a loopback test on Digi Connect and ConnectPort units using connect
Category: Troubleshooting
Loopback Testing on Device or Terminal Servers Using Connect 1. A loopback plug is shipped with Digi products for serial port testings. Plug the loopback plug into the serial port to be tested.   2. From the Windows CMD or a Unix/...
Steps for Updating the Linux RealPort Driver
Category: Configuration, Installation
We recommend installing the latest driver release from: http://www.digi.com/support/productdetail?pid=2247&type=drivers Update instructions:   cp /etc/dgrp.backing.store /etc/orig.dgrp.backing.store Turn off all getty processes in /etc...
Greenbow VPN client will fail with a Phase 2 error
Category: Troubleshooting, Configuration
With Digi Cellular firmware 2.13 and above Greenbow VPN client will fail with a Phase 2 error. This is caused by old obsolete NAT-T draft protocols. Theses protocols will have to be turned off in the Digi. This is a configuration option that can be ...
How to find out the date code and manufacturing location information of Digi Products.
Category: Configuration, Hardware, Installation, Miscellaneous
Depending on the location the units are built effects the orientation, linked below is the date code from USA or Thailand.  The date code is 4 digits, 2 digit year and 2 digit week (YYWW) so in these examples the 26th week of 2012. Thailand M...
Device Cloud Migration Guide:  How do I migrate my gateway to a different Device Cloud server?
Category: Configuration, Hardware, Troubleshooting
Introduction Digi makes a number of different products capable of connecting to the Device Cloud , from hardware products to those which are purely software.  Unfortunately, not all of these devices have the...
Getting Device Cloud Connected:  Configuring Digi Connect and ConnectPort Gateways for Device Cloudconnection - Web User Interface (WebUI) method
Category: Configuration
Changing a Gateway's Device Cloud Remote Configuration settings from the Device Cloud: The easiest way to change the Device Cloud configuration of supported Gateway is from the Device Cloud UI Properties page of a Gateway which is already&nbs...
Firewall concerns for outbound Gateway connections to the Device Cloud --> What to do if everything checks out but your Gateway still shows up as "Disconnected"...
Category: Configuration, Troubleshooting
Prerequisites:   This article assumes you've already read through and tried the steps in these two knowledgebase articles: 1. How do I migrate my Digi product to a different Device Cloud server? 2. HOW TO: Configure an...
Loopback testing Digi Connect WAN,  Digi Connect SP, Digi Connect Wi SP, ConnectPort WAN and ConnectPort X4/8 units using connect
Category: Troubleshooting
Loopback Testing: 1. Plug the DB9 loopback plug into the serial port to be tested (a loopback plug is shipped with every Digi unit).   2. From the Windows CMD or a Unix/Linux "root" prompt, telnet to the IP address of the Digi d...
How to Install RealPort in Red Hat or CentOS 6
Category: Installation
First ensure the following package dependencies are installed on your system: make, rpm-build, bash, gcc, glibc-devel, kernel-devel, kernel-headers, ncurses-devel, perl, and tcsh. The kernel-devel and kernel-headers packages must match your run...
Contact a Digi expert and get started today! CONTACT US

Desktop Site