Home > Support > Knowledge Base

Knowledge Base

All
Configuration: 13 result(s) found
Installation: 9 result(s) found
Hardware: 4 result(s) found
Miscellaneous: 10 result(s) found
Troubleshooting: 11 result(s) found

 

There are 14 search results for ""
What ports are used with the ADDP protocol?
Category: Configuration, Hardware, Installation, Troubleshooting
ADDP uses udp port 2362 and a mulicast ip address of 224.0.5.128. You will need to enable these on your firewall for the ADDP protocol to work for the device discovery utility.
How do I program my Linux images onto a Digi embedded module?
Category: Configuration, Installation, Miscellaneous
Single (or batch) modules you get for Linux, will only come with a pre-installed unreleased U-Boot intended for quality test purposes at Digi. Be aware this version will change from time to time: so always reprogram with your own customized U-Boot ve...
Understanding MTBF (Mean Time Between Failures)
Category: Hardware, Installation, Miscellaneous
MTBF is defined as the point in time at which 1/e devices on average will still be operational (1/e is approximately 37%) Furthermore, MTBF specifically excludes wear-out factors.  A fan’s MTBF may be dozens of years but it will  i...
How to install multiple releases of Digi Embedded Linux(DEL) together
Category: Configuration, Installation, Miscellaneous, Troubleshooting
Default DEL installation folder is /usr/local/DigiEL-x.y and should not be installed as root. Declarations: Digi Embedded Linux package comes with an Eclipse based IDE 'Digi ESP' .  Digi has tested Digi ESPs on - 5.2 on Kubuntu 8.10 ...
How to run D-Bus session bus on DEL modules?
Category: Configuration, Miscellaneous, Troubleshooting
When you work with QT's Inter-Process Communication (IPC) and Remote Procedure Calling (RPC) mechanism , ie: D-Bus , you might have faced some errors like shown below: Failed to start message bus:Failed to read directory '/etc/dbus-1/session....
How to work with ADDP device discovery protocol and devices running embedded Linux like ConnectCore, ConnectCard, Digi Connect ME 9210
Category: Configuration, Installation, Miscellaneous, Troubleshooting
In order to be able to search for embedded Linux devices in your local network with the ADDP protocol using broadcasts/multicasts you need to add the "addpd" to your root file system. This can be done in Digi Embedded Linux ESP in a rootfs project j...
Running QT application on DEL modules shows NO output in LCD display
Category: Configuration, Hardware, Troubleshooting
A Qt for Embedded Linux application requires a server application to be running, or to be the server application itself. Any Qt for Embedded Linux application can be the server application by constructing the QApplication object with the QApplication...
Running Qt sample application on Wi-i.MX28 with Fusion 7" LCD (from Android Kit)
Category: Configuration, Installation, Miscellaneous, Troubleshooting
Digi Embedded Linux 5.9 default Linux build for ConnectCard (Wi-)i.MX28 by default has not configured any graphical capabilities. In order to run the Qt example applications with the Fusion 7" LCD as used in the i.MX28 Android kit, you have to ena...
Digi Embedded Linux (DEL) graphical project or kernel configuration fails with: make -k xconfig HOSTCXX scripts/kconfig/qconf.o make: ***[xconfig] Error 2
Category: Configuration, Installation, Miscellaneous, Troubleshooting
Sometimes you see more details, e.g.: make -k xconfig   CHECK   qt sed < /usr/local/DigiEL-5.9/scripts/scripts/kconfig/lkc_proto.h > scripts/kconfig/lkc_defs.h 's/P(\([^,]*\),.*/#define \1 (\*\1_p)/'   HOSTCC&n...
U-Boot prompt change is not reflected. Prompt remains unchanged.
Category: Configuration, Troubleshooting
The following patch which will be released with DUB-1.6.4.x or higher fixing the problem. You need to patch the U-Boot (1.6.3.x) sources in /usr/local/DigiEL-5.9/bootloader/u-boot-denx/ and after patching create a new U-Boot project (delete the old ...
U-Boot project rebuild throws error
Category: Troubleshooting, Miscellaneous, Configuration
When using DEL-5.9.6.2 rebuilding an U-Boot project you will get: make -k rebuild Generating include/autoconf.mk Generating include/autoconf.mk.dep make[1]: *** No rule to make target `ccardwmx28js_config'. make: *** [uboot_distclean] Error ...
When running Android installer under Linux, getting: aadk_installer.run: 2: aadk_installer.run: Syntax error: end of file unexpected (expecting ")")
Category: Installation, Troubleshooting, Configuration, Miscellaneous
The Android installer is maybe a 32bit LSB ELF executable. You can check this with: file aadk_installer.run showing you something about 32bit. If you are running a 64bit Ubuntu you have to install the 32bit libraries: sudo apt-get install ...
MAC addresses are not printed on ConnectCard for i.mx28 module label, how to get it?
Category: Configuration, Hardware, Miscellaneous
MAC addresses are not printed on module's label due to space constraints. Customer needs to: Read MACs from NVRAM Read MAC from barcode on white label of module(If your module has 4 3D barcodes on label). If module has only 3 ...
How to perform Reboot on an Android device running Etherios Cloud Connector?
Category: Configuration, Installation, Troubleshooting
Etherios Cloud Connector can be downloaded from Play Store and installed onto any Android device. All features of Device cloud on a device is available with an exception on *reboot*. In general an Android phone cannot be rebooted fr...
Contact a Digi expert and get started today! CONTACT US