Home > Support > Knowledge Base > Knowledge Base Article

Is there a suggested BOM list for populating the RS-485 and/or suggested resistor relative to fitting the spots on the MiniCore serial communication accessory board (package size/dimensions)?

Here are the parts:

 

JP11 – Connector, 2x4, 100MIL spacing

JP12 - CONN, HEADER, 1X4, 100 MIL SPACING

 

R26 - RES, 100K OHMS, 1/10W, 5%, TF, +/-200PPM/C, 0805

R14 - RES, 100K OHMS, 1/10W, 5%, TF, +/-200PPM/C, 0805

R10 - RES, 0 OHMS, 1/10W, 5%, TF, +/-200PPM/C, 0805

R11 - RES, 0 OHMS, 1/10W, 5%, TF, +/-200PPM/C, 0805

R12 - RES, 0 OHMS, 1/10W, 5%, TF, +/-200PPM/C, 0805

R13 - RES, 100K OHMS, 1/10W, 5%, TF, +/-200PPM/C, 0805

R15 - RES, 681 OHMS, 1/10W, 5%, TF, +/-100PPM/C, 0805

R16 - RES, 220 OHMS, 1/8W, 5%, TF, +/-200PPM/C, 1206

R20 - RES, 681 OHMS, 1/10W, 5%, TF, +/-100PPM/C, 0805

JP13 - CONN, HEADER, 2X2, 100 MIL SPACING, SMT

J1 - CONN, SCREW TERMINAL, 1X3, 197 SPACING, TH

U3 – IC, I/O RS485 TRANSCEIVER, 3V, SP3072EEN, SO8

C12 - CAP, 0.1uF, 16V, 10%, X7R, 0603

C14 - CAP, 10uF, 10V, 10%, X5R, 0805

Contact a Digi expert and get started today! CONTACT US