Home > Support > Knowledge Base > Knowledge Base Article

Device Cloud Migration Guide:  How do I migrate my gateway to a different Device Cloud server?

Introduction

Digi makes a number of different products capable of connecting to the Device Cloud , from hardware products to those which are purely software.  Unfortunately, not all of these devices have the same method of configuration for getting to the Device Cloud, due to different capabilities and/or the market focus of that product.  If you don't know how to configure your Digi product to connect to the Device Cloud, this article is for you....

NOTE:  The following list is not intended to be exclusive.  In other other words, if a Gateway isn't listed here, that doesn't necessarily mean it isn't capable of connecting, only that we haven't managed to add a link to an article for it yet.  We do intend to include guidance for every capable Gateway possible at some point in the future, but for now please bear with us as this is a work in progress....


Hardware-based Device Cloud-capable Gateways

Applicable Products: Digi Connect and ConnectPort products (except: ConnectPort X2 for Smart Energy, ConnectPort X2e (all variants), ConnectPort X2 M-Bus (older variants), Digi ERT/Ethernet Gateway, ConnectPort X3/X3R, Digi X-Trak 3 - see elsewhere in this document)
Configuration Method:  Device Web User Interface (WebUI)   
Article:  Digi Connect and ConnectPort products WebUI Device Cloud Configuration Guide

Applicable Products: Digi ConnectPort X2e (ZB and SE) Eth and Eth/Wi-Fi products
Configuration Method:
Device Web User Interface (WebUI)
Article: Digi ConnectPort X2e products WebUI Device Cloud Configuration Guide

Applicable Products: ERT/Ethernet Gateway, Digi Connect and ConnectPort products (except: ConnectPort X2e, ConnectPort X3/X3R, Digi X-Trak 3 - see elsewhere in this document)
Configuration Method:  Device CommandLine Interface (CLI)
Article: Digi Connect and ConnectPort products CLI Device Cloud Configuration Guide


Software-based Device Cloud-capable Gateways:

Applicable Products: Gateways/XBee Networks using XIG (Xbee Internet Gateway) software
Configuration Method:  Software - Edit the settings.json file; Hardware - WebUI or CLI of Gateway (see Hardware-based Device Cloud-capable Gateways section above) 
Article:  Changing Device Cloud Servers

Applicable Products: Etherios Cloud Connector software implementations
Configuration Method:
 Software - Modify project for correct Device Cloud server url, then re-compile 
Article:  Step-by-step Guide to Migrating Etherios Cloud Connector Devices
Contact a Digi expert and get started today! CONTACT US