Smartlee is not able to discover the ERT Smart Energy Bridge on the HAN.
When Smartlee is unable to discover an ERT Smart Energy Bridge for joining with Digi's ConnectPort X2 Smart Energy or ConnectPort X2e Smart Engery Gateway, it is recommended that the small (recessed) reset button is pressed 4 times quickly. A small object, such as an unfolded paper clip will need to be used in order to reach the button.
This action will force the ERT Smart Energy Bridge to leave any currently joined PAN and attempt to re-join. Once the button is pressed 4 times, a power cycle of the ERT Smart Energy Bridge is recommended.
*Note, the timing of the 4 button press is important. Counting "1-2-3-4" will simulate the timing needed.
© Copyright 1996-2015 Digi International Inc. All rights reserved. Your M2M Expert®