Home > Support > Knowledge Base > Knowledge Base Article

Is there an isolation for PoE on the Connect ME/ME 9210 Modules?

According to 802.3af compliance, a 1500V isolation barrier is expected between PoE capable module and the point of entry from the Ethernet cable.

On Connect ME/ME 9210 pins 1&2 are Power Pass-Thru+ & Power Pass-Thru- respectively.
To meet 802.3af standard 1500V isolation is expected between pins 1&2 from 7-20.

However, Connect ME/ME 9210 modules do not meet the 1500V isolation specification of the 802.3af standard. 
This design decision was intentional  as there isn’t enough room in the ME/ME 9210 module to meet the creepage and clearance distances needed for 1500V isolation.
Contact a Digi expert and get started today! CONTACT US