Digi Device Discovery Tool Shows Unit as Misconfigured'

Digi Device Discovery Tool Shows Unit as Misconfigured

The Digi Device Discovery Tool will figure out what it believes to be your Network Adapters IP Address and Submask, and if a Digi Unit on the network reports back with an IP address that does not seem to line up it will report the Unit as misconfigured. In the Example below the IP Address and Submask the PC is using is 10.4.110.1 and 255.255.255.0. When the Digi Device Discovery Tool sees the unit with a 192.168.1.12 IP address it will recognize the fact you can not communicate to it (as it is on a different network segment) and report back to you it is misconfigured. Please note that the utility will not report back misconfigured if, for instance, the serial ports on the device are not setup correctly in how you intend to use them, misconfigured only applies to the IP settings of the unit.


Your M2M Expert®for Businessfor Developers
Contact Us
Phone
Email
Chat
Feedback
Newsletter SignupYouTubeGoogle+FacebookCopyright © 1996-2014 Digi International Inc. All rights reserved. Legal