Digi ConnectCore System-on-Modules Single Board Computers Development kits

Digi Connect ME®


Secure Network Device Server Module

  • Integrated 10/100 Mbit Ethernet interface
  • Strong enterprise-grade network security
  • Common family footprint for wired and wireless modules
  • High-speed serial interface (UART)

The Digi Connect ME is a secure device server module that delivers complete and versatile embedded IPv6-ready network connectivity and strong standards-based encryption services such as SSL/SSH. Built on leading Digi 32-bit NET+ARM technology, the Digi Connect ME is cost effective and easy to use in existing and new product designs, while powerful enough to meet future product performance needs.

Digi Connect ME is available pre-loaded with Digi plug-and-play firmware, which eliminates software development efforts by providing powerful and configurable IPv4/IPv6 device server functionality, including an easy-to-use web user interface and security features. Target applications include retail systems, security/access control, medical devices and building/industrial automation.

In addition, the Digi JumpStart Kit® for the IPv6-ready Thread-X based NET+OS® development platform delivers an easy-to-use, affordable development solution for custom embedded applications. The kit provides the integrated building blocks to quickly and cost-effectively create flexible and secure embedded applications for integrated high-performance networking solutions.

Specifications Digi Connect ME
Processor Type 32-bit Digi NS7520 processor
Processor Speed 55 MHz
Memory Base Population 2/4 MB NOR flash
Pins/Form Factor RJ-45 connector style with 20-pin micro pin header (Samtec FTS-110-01-F-DV-TR)
High-Speed TTL Serial Interface Up to 230 Kbps data rate
Full signal support for TXD, RXD, RTS, CTS, DTR, DSR and DCD
Hardware/Software flow control
GPIO Up to 10 shared with 1 external IRQ
JTAG Interface NET+OS development modules only (P/N DC-ME-01T-JT, DC-ME4-01T-JT)
Wave-Solderable Design No clean flux process
Dimensions (L x W x H) 1.445 in (36.7 mm) x 0.75 in (19.05 mm) x 0.854 in (21.69 mm)
Network Interface - Wired
Standard IEEE 802.3
Physical Layer 10/100Base-T
Data Rate 10/100 Mbps (auto-sensing)
Mode Full- or half-duplex (auto-sensing)
Connector RJ-45
Integrated Ethernet MAC/PHY Yes
PoE Power Pass-Through Yes
Operating Temperature -40° C to +85° C (-40° F to +185° F)
Storage Temperature
Relative Humidity 5% to 90% (non-condensing)
Power Requirements (3.3 V)
Maximum 270 mA (891 mW)
Regulatory Approvals
FCC Part 15 Class B, EN 55022 Class B Yes
EN 61000-3-2 and EN 61000-3-3 Yes
ICES-003 Class B, VCCI Class II, AS 3548 Yes
FCC Part 15 Sub C Section 15.247 Yes
IC RSS-210 Issue 5 Section 6.2.2(o) Yes
EN 300 328, EN 301 489-17 Yes
UL 60950-1, EN 60950 (EU) Yes
CSA C22.2, No. 60950 Yes
EN 55024 Yes
Product Warranty 3 years

Digi Connect ME - Back

Digi Connect ME - Bottom

Recently Viewed