Have a Question?

Digi One® SP IA

Ethernet Enable Any Industrial Device

 
  • Serial-to-Ethernet for industrial automation
  • Device server with DIN rail and wall mount kits
  • 1 switch selectable RS-232/422/485 serial port
  • TCP/UDP Socket Services for broad device connectivity
How to Buy

Digi One SP IA is a high-performance serial server providing entry level serial-to-Ethernet connectivity for virtually any serial device. It features a 9-30 VDC power input with bare-wire “pigtail” for a direct connection, includes a DIN rail and wall mount kit and is one of the smallest solutions available, making it ideal for industrial applications.

Digi One SP IA device server supports most IA protocols through TCP/UDP connections, serial bridging or COM port redirection using Digi’s patented RealPort® software. RealPort enables existing applications to communicate, without modification, with serial devices over the Ethernet as if they were communicating over a serial cable. Additionally, Digi One SP IA features modem emulation, allowing equipment designed for modem access to communicate transparently across the Ethernet.

Digi One SP IA is easy to install locally or remotely. The IP address can be configured using DHCP, ARP-Ping or Setup, an application included with the installation CD that automatically detects all Digi One serial server devices on the network. Users can auto-connect a serial device to a networked server using raw, Telnet or rlogin. Advanced functions can be configured into an application using the web interface.

KEY INDUSTRIES

Specifications Digi One SP IA
Features
Management HTTP configuration
Protocols TCP/UDP Socket Services, UDP Multicast, Telnet, Reverse Telnet, RFC2217, DHCP/RARP/ARP-Ping for IP address assignment
Software Patented RealPort COM port redirector for COM/TTY ports for Microsoft® Windows®, UNIX® and Linux®
Operating Systems AIX, HP-UX, Solaris, Linux®, Windows® 2000, Windows® XP, Windows® 7, Windows® 8, Windows® 8.1, Windows® 10, Windows Server® 2003, Windows Server® 2008, Windows Server® 2012. Note: TCP/UDP socket services are operating system independent
Status LEDs Link, Power
Dimensions
(L x W x D)
3.70 in x 1.72 in x 0.93 in (9.40 cm x 4.30 cm x 2.30 cm)
Weight 2.29 oz (65.00 g)
Other Full modem and hardware flow control, Modem emulation, DIN rail and wall mount kit included
Interfaces
Serial Ports RS-232/422/485 (switch selectable)
Serial Connector DB-9M
Serial Throughput Up to 230 Kbps
Ethernet Physical Layer 10/100Base-T
Power Requirements
Power Input 9-30 VDC @ 0.5 Amps max
Power Supply 12 VDC/1.5A max out; 100-240 VAC 50-60 Hz in (wall mount)
Power Consumption Typical: 4 W; Max: 6 W
Product Surge Protection (ESD) 4 kV burst (EFT) per EN61000-4-4, 2 kV surge transient per EN61000-4-5 when used with supplied power adapter
Power Connector Bare-wire "pigtail" power connector
Environmental
Operating Temperature 10º C to 45º C (50º F to 113º F)
Relative Humidity 5% to 90% (non-condensing)
Regulatory Approvals
Safety UL 60950, EN60950, CAN/CSA C22.2 No.60950
Emissions/Immunity FCC Part 15 Subpart B (Class A), EN55024, EN55022 (Class A), EN61000-3-2,3
 

Digi One SP IA - Front

Digi One SP IA - Back

Drivers

Firmware

Cabling

Utilities

Recently Viewed

Contact a Digi expert and get started today! Contact Us