SDLC/HDLC Products

13 results
RabbitCore® RCM3209 Series
Microprocessor Core Module
  • Rabbit 3000 microprocessor at 44 MHz
  • Optional 10/100Base-T Ethernet
  • 512K Flash / 256K SRAM / 512K Program Execution SRAM
  • 52 digital I/O and 6 serial ports for multiple connectivity options
RabbitCore® RCM3400 Series
Microprocessor Core Module
  • Rabbit 3000 microprocessor at 30 MHz
  • Up to 512K Flash/512K SRAM
  • 8 channel 12-bit A/D with programmable gain
  • 47 digital I/O and 5 serial ports (IrDA, HDLC, asynch, SPI)
RabbitCore® RCM3600 Series
Microprocessor Core Module
  • Rabbit 3000 microprocessor at 22 MHz
  • Up to 512K Flash/512K SRAM
  • 33 parallel digital I/O with configurable options
  • 4 serial ports (IrDA, HDLC, async, SPI)
RabbitCore® RCM3700 Series
Microprocessor Core Module
  • Up to 4 serial ports for multiple device connectivity
  • 10Base-T with optional 10/100Base-T Ethernet
  • Up to 512K Flash for code and up to 512K SRAM for data
  • 1 MB of on-board serial Flash utilizing FAT file support
RabbitCore® RCM3900 Series
Microprocessor Core Module
  • Rabbit® 3000 microprocessor at 44 MHz
  • Extended operating temperature range: -20° C to +80° C
  • 10/100Base-T Ethernet
  • Up to 1 GB microSD hot-swappable storage
RabbitCore® RCM4100 Series
Microprocessor Core Module
  • Rabbit 4000 running up to 59 MHz
  • 512K Flash, 256K / 512K Data SRAM
  • Up to 40 GPIO, up to 6 CMOS-compatible serial ports
  • Auxiliary I/O feature for reducing processor bus loading
RabbitCore® RCM4300 Series
Microprocessor Core Module
  • Rabbit 4000 running at 58.98 MHz
  • Supports microSD and microSDHC memory cards, 1 MB SRAM for shared code, 512K of battery-backed SRAM, FAT file organization
  • 10/100Base-T Ethernet, 36 GPIO, 6 serial ports
  • 8 channel 12-bit resolution (RCM4300 only)
  • Embedded web server
Rabbit® SBC BL4S200 Series
Single-Board Computer
  • Uses Rabbit® 4000 and Rabbit 5000 microprocessors
  • Choice of Wi-Fi or Ethernet connectivity
  • 40 digital I/O and up to 5 serial ports
  • 8 input and 2 output analog channels
  • Advanced I/O subsystem is software configurable reducing the load on the processor
Rabbit® SBC BL4S100 Series
Single-Board Computer
  • Rabbit 4000 running at 40 MHz
  • On-board Rabbit RIO® device for exceptional I/O functionality and flexibility
  • Web Server functionality
  • Easy implementation of mesh networking with known good hardware
  • Dynamic C® software environment to reduce development time
Rabbit® SBC LP3500 Series
Single-Board Computer
  • Low power consumption less than 100 uA in power save mode
  • 8 A/D inputs with 12 bit resolution
  • Digital outputs can sink up to 200 mA
  • 6 serial ports for multiple device connectivity
  • 16 protected digital inputs
Rabbit® SBC BL2600 Series
Ethernet-Enabled Single-Board Computer
  • Rabbit® 3000 microprocessor at 44 MHz
  • 10/100Base-T Ethernet, RJ-45
  • 512K Flash/512K SRAM
  • 36 digital I/O (configurations include protected digital inputs, sinking/sourcing outputs, high current outputs)
  • 12 analog channels: eight 11-bit A/D, four 12-bit D/A buffered outputs
Rabbit® SBC BL2100 Series
Single-Board Computer
  • 40 sinking/sourcing digital I/O
  • Up to 512K Flash for program and up to 512K SRAM for data
  • 16 digital outputs which can sink/source 200 mA
  • 11 A/D and 4 D/A with 12-bit resolution
  • Up to 4 serial ports: two 3-wire (or one 5-wire) RS-232 and 1 RS-485
Rabbit® OP7200 eDisplay
Ethernet-Intelligent Operator Interface
  • Rabbit® 2000 microprocessor at 22 MHz
  • ¼ VGA display (320 x 240 pixels)
  • 10Base-T Ethernet, RJ-45
  • 256K Flash/128K SRAM
  • 24-27 industrialized I/O and 4 CMOS-compatible serial ports