Have a Question?

Digi XBee-PRO® Zigbee Wall Router

Plug-In Router Expands the Reach of Zigbee® Networks

 
  • Plugs into a standard power outlet for easy deployment
  • Extends signal strength and range of an XBee Zigbee mesh network
  • Creates additional network pathways for more reliable mesh networking
  • Small form factor for unobtrusive deployment
  • Integrated light and temperature sensors
How to Buy

Digi's XBee wall router is a small extender used to create or expand a Zigbee network, allowing other Zigbee enabled devices to seamlessly communicate with each other. The wall router simply plugs into a standard power outlet for quick and easy deployment. Once deployed, the router acts as a mesh network routing node, expanding the range and adding redundancy to a wireless network.

Additionally, environmental sensors included on the Digi XBee wall router allow ConnectPort® X gateway users to monitor temperature and light conditions throughout the deployment area.

Built upon the extended range XBee-PRO Zigbee module, the XBee wall router is fully interoperable with other XBee ZB devices, including XBee modules, adapters, sensors and gateways. XBee products are part of Digi's Drop-in Networking family of solutions, offering users seamless wireless communication between devices. XBee adaptors deliver wireless connectivity to electronic devices in wired networks. XBee sensors provide real-time environmental information from the deployment area. ConnectPort X gateways enable users to access and configure remote devices in a network.

KEY INDUSTRIES

RF Professional Services from Digi
On-site services and support for RF solution implementation including site survey, integration, training and troubleshooting.

Specifications XBee-PRO ZB Wall Router
Performance
RF Data Rate 250 Kbps
Indoor/Urban Range* Up to 300 ft (90 m)/200 ft (60 m) Int'l variants
Outdoor/RF Line-of-Sight Range* Up to 1 mile (1.6 km)/2500 ft (750 m) Int'l variants
Transmit Power 50 mW (+17 dBm)/10mW (+10 dBm) Int'l variants
Receiver Sensitivity (1% PER) -102 dBm
Features
Interfaces Network interoperable with Zigbee PRO Feature Set devices
Frequency Band 2.4 GHz (ISM)
LEDs Power: Solid when external power is supplied
Associate: Blinks when unit is connected and associated to an RF Network
Push Button Device reset, configuration reset to factory defaults, identification/commissioning mode
Antenna Options Internal
Locking Mechanism Unit secures to power outlet using center outlet screw (U.S. only)
Integrated Temperature & Light Sensor
Temperature Sensor Range: -20° C to +70° C (-4° F to +158° F) Accuracy: +/- 2° C
Ambient Light Sensor Range of spectral bandwidth: 360 to 970 nm (similar to human eye)
Wavelength of peak sensitivity: 570 nm
General
Dimensions (L x W x H) 2.87 in x 1.97 in x 1.37 in (7.30 cm x 5.00 cm x 3.50 cm)
Weight 2.50 oz (70.87 g)
Power Input Universal AC input (85VAC to 265VAC)
Environment (Temperature/Lux) 0° C to +70° C (32° F to +158° F; sub 1200 lux)
Relative Humidity 5% to 95% (non-condensing)
Regulatory Approvals
FCC (USA) Yes
IC (Canada) Yes
CE/ETSI (Europe) Yes, Int'l variant
C-TICK (Australia) Yes
Telec (Japan) Yes, Int'l variant

*Range figure estimates are based on free-air terrain with limited sources of interference. Actual range will vary based on transmitting power, orientation of transmitter and receiver, height of transmitting antenna, height of receiving antenna, weather conditions, interference sources in the area, and terrain between receiver and transmitter, including indoor and outdoor structures such as walls, trees, buildings, hills, and mountains.

Links

Related Links

Support Documentation


Drivers

Utilities

Recently Viewed

Contact a Digi expert and get started today! Contact Us