Have a Question?

Digi XBee® 802.15.4 Adapters

Remote Monitoring and Control for Multipoint Networks

 
  • 802.15.4 wireless connectivity for RS232, 485, and USB devices
  • Compatible with XBee gateways and modules
  • Small form factor for easy handling and installation
How to Buy

Digi XBee & XBee-PRO 802.15.4 adapters provide low-cost, low-power wireless point-to-multipoint networking of electronic devices. They are ideal for enabling wireless connectivity to sensors, controllers and other devices in legacy wired applications, without the development time required for embedded solutions.

These small adapters are available in externally powered, battery powered and power harvesting options. Adapters are offered in a wide range of physical interfaces, including RS-232, RS-485, USB, Digital I/O and Analog I/O interface options.

KEY INDUSTRIES

RF Professional Services from Digi
On-site services and support for RF solution implementation including site survey, integration, training and troubleshooting.

Specifications Digi XBee-PRO 802.15.4 Adapter
PERFORMANCE
RF DATA RATE 250,000 bps
INDOOR/URBAN RANGE* Up to 300 ft
OUTDOOR/RF LINE-OF-SIGHT RANGE* Up to 1 mile
TRANSMIT POWER 60 mW (+18 dBm)
RECEIVER SENSITIVITY (1% PER) -100 dBm
FEATURES
ANTENNA TYPE Integrated whip antenna
FREQUENCY BAND 2.4 GHz
SERIAL DATA INTERFACE RS-232 (DB-9M)
RS-485 (6-position wire terminal block) - Switch selectable between RS-422 half duplex, RS-422 full duplex and RS-485 Sensor (RJ-45)
USB DATA INTERFACE USB 2.0 Full Speed (with ESD protection); connects to host via captive 2-meter cable
NETWORKING & SECURITY
NETWORK TOPOLOGIES Point-to-Point, Point-to-Multipoint, Peer-to-Peer
NUMBER OF CHANNELS 12 channels
SPREAD SPECTRUM TYPE Direct Sequence Spread Spectrum
FILTRATION OPTIONS PAN ID, Channel, 264 (64-bit) addresses
OTHER
LEDS Power: Glows green when external power is supplied (not active when battery powered to limit power drain)
Associate: Blinks when unit is connected and associated on an RF network
CONTROLS Device reset (internal push button); Identification (internal push button) – relays ID to gateway
DIMENSIONS (L X W X H) & WEIGHT RS-232, RS-485, AIO, DIO models: 3.87 in x 1.68 in x 0.99 (9.84 cm cm x 4.26 cm x 2.53 cm) 2.29 oz (64.92 g) USB models: 2.87 in x 1.80 in x 0.83 in (7.29 cm x 4.57 cm x 2.10 cm) 1.60 oz (45.36 g)
OPERATING TEMPERATURE -40° C to +70° C
POWER REQUIREMENTS
INPUT VOLTAGE RS-232, RS-485, AIO, DIO models: 9-30 VDC
USB models: Bus powered (+5V)
POWER CONSUMPTION USB: 70 mA Rx and 250 mA Tx (normal operation) / 200 uA (suspend mode)
REGULATORY APPROVALS
EMISSIONS FCC Part 15.247, IC, CE, Telec, EN55022 (Class A)
SAFETY UL60950
ROHS Yes

Line Art

*Range figure estimates are based on free-air terrain with limited sources of interference. Actual range will vary based on transmitting power, orientation of transmitter and receiver, height of transmitting antenna, height of receiving antenna, weather conditions, interference sources in the area, and terrain between receiver and transmitter, including indoor and outdoor structures such as walls, trees, buildings, hills, and mountains.

Links

Related Links

Drivers

Firmware

Cabling

Utilities

Recently Viewed

Contact a Digi expert and get started today! Contact Us