Products

Range

Wired Protocol

Connector

Wireless Interfaces

Frequency

Security

Family

Industry: Energy

Industry: Industrial

Industry: Medical

Industry: Smart Cities

Industry: Retail

Industry: Transportation

Cellular

Ethernet

Authentication

Display/Video

Internet Protocol

Form factor

Mounting

Operating Temperature

OS Support

PCI interface

Power

Processor

Programming Language

Protocols

Serial Ports

Carrier

Software Support

Surge Protection

USB Ports

USB Version

44 results
XBee® SX
900 MHz OEM RF modules pack maximum power, security, and flexibility into the XBee SMT footprint for mission-critical wireless designs
  • SX family includes powerful 1-Watt 900 MHz XBee-PRO and battery-optimized 20 mW XBee modules for mission-critical OEM designs
  • DigiMesh networking topology for redundancy and reliability
  • 256-bit AES encryption for secure data communications
  • XBee SMT form factor saves valuable PCB space
  • Fully certified for use in unlicensed 900 MHz band
ConnectCore® for i.MX6UL
The Industry’s smallest wireless low-power NXP i.MX6UL System-on-Module platform to build your intelligent and secure connected devices
  • Stamp-sized, secure, connected System-on-Module platform
  • NXP i.MX6UL-2, Cortex-A7 @ 528 MHz
  • Up to 2 GB NAND flash, up to 1 GB DDR3
  • Patent-pending low-profile Digi SMTplus™ form factor
  • Integrated Microcontroller Assist™ for 30 µA ultra-low power modes
  • Pre-certified 802.11a/b/g/n/ac + Bluetooth 4.2 option
  • Integrated dual 10/100 Ethernet connectivity
  • Exclusive Digi TrustFence™ embedded device security framework
  • Turnkey and royalty-free embedded Linux software platform
  • Industrial operating temperature and reliability
ConnectPort® TS 8/16
Terminal Servers with Dual IPv4/IPv6 Stack
  • Dual IPv4/IPv6 stack
  • 8 or 16 serial ports with Tx/Rx LEDs
  • Patented RealPort® technology for COM/TTY port control/ management
  • SSL/TLS and SSHv2 for added security
  • Easy configuration and management through web browser or CLI
XBee® ZigBee
Embedded ZigBee RF modules provide OEMs with a simple way to integrate mesh technology into their application
  • Programmable versions with on-board microprocessor enable custom ZigBee application development
  • Through-Hole and Surface Mount form factors enable flexible design options
  • Link budgets of 110 dB for XBee and 119 dB for XBee-PRO
  • Industry-leading sleep current
  • Firmware upgrades via UART, SPI or over the air (OTA)
  • Thread updatable on the S2D EM3587 variant for maximum flexibility
XBee® Gateway
Programmable XBee to IP Gateway with Scalable Device Management
  • Secure WAN connectivity for large networks of XBee-based devices
  • Open Source Python environment for custom application development on the gateway
  • Flexible Cellular, Wi-Fi and Ethernet WAN connectivity options
  • Integration with Digi Device Cloud enables remote configuration and management of complete XBee network
Hubport®
Switched USB Expansion Hubs
  • Industrial USB 2.0 hubs
  • Switched USB for maximum performance on all ports
  • 4 or 7 ports in a compact plastic or metal chassis
  • DC powered models can be used with 12V or 24V batteries
  • Locking power connector
ConnectPort® LTS 8/16/32
Next generation serial servers support GB Ethernet and IPv6 networks. Optional ZigBee and USB bring wireless capabilities into multi-port serial server environments.
  • Dual GB Ethernet ports for redundancy
  • 8, 16 or 32 serial ports
  • EIA 232 and MEI (232/422/485) versions.
  • LCD display and SD memory slot
  • W model offers USB 2.0 ports for expandability, internal modem and XBee socket for ZigBee communications
ConnectCore® 6
NXP/Freescale i.MX6 Cortex A9 SoM
  • Scalable Cortex-A9 multi-core performance
  • Microcontroller Assist™ option on module
  • Cost-effective, reliable, low-profile surface-mount form factor
  • Pre-certified 802.11a/b/g/n and Bluetooth 4.0 connectivity
  • Designed for reliability and long-term availability
  • Linux, Android and Windows Embedded support
XBee-PRO® 900HP
Long Range 900 MHz OEM RF Module
  • Superior LOS range of up to 28 miles with high-gain antenna
  • Simplified AT command set and advanced XBee API 
  • Over-the-air firmware updates
  • Software-selectable channel mask for interference immunity
  • Advanced sleep modes: sleeping routers, pin sleep, cyclic sleep
  • Try these modules out with a XBee-PRO 900HP DigiMesh Kit
Digi TransPort® WR21
Compact, flexible, low-cost 3G/4G LTE M2M enterprise router
  • Software-defined multicarrier and global 3G/4G LTE support
  • License-free enterprise software supporting advanced routing protocols, VPN, logging/authentication, and stateful firewall
  • Digi Remote Manager provides centralized configuration, security management, and network analytics
  • Dual SIMs and Digi SureLink™ provide redundant connection
  • RS-232 serial and 10/100 Ethernet or RS-232/422/485 serial and 2-port Ethernet switch
XBee® 802.15.4
Low-cost, easy-to-deploy RF modules provide critical end-point connectivity to devices and sensors
  • Simple, out-of-the-box RF communications, no configuration needed
  • Point-to-multipoint network topology
  • 2.4 GHz for worldwide deployment
  • Common XBee footprint for a variety of RF modules
  • Industry leading sleep current of sub 1uA
  • Firmware upgrades via UART, SPI or over the air
  • Migratable to DigiMesh and ZigBee PRO protocols and vice-versa
XBee® DigiMesh® 2.4
Wireless Mesh Networking RF Module
  • Dynamic peer-to-peer DigiMesh protocol with sleeping routers
  • No configuration needed for out-of-the-box RF communications
  • 2.4 GHz globally deployable frequency
  • Self-healing and discovery for network stability
PortServer® TS
Easy Serial-to-Ethernet Connectivity
  • 1, 2, 4, 8 or 16 RS-232 RJ-45 serial ports
  • RealPort® with encryption provides SSL-based protection
  • SSHv2 for encrypted connections
XTend® 900 MHz
1 Watt Long-Range OEM RF modules
  • ISM 900 MHz operating frequency
  • 100 mW - 1 Watt power output (up to 40 mile range)
  • 256-bit AES Encryption
  • Available with DigiMesh®
  • Available in smaller, lower power XBee Surface Mount form-factor
PortServer® TS MEI
RS-232/422/485 Switch Selectable Expansion for Asynchronous Connectivity
  • RS-232/422/485 switch selectable serial ports
  • 1, 2, 4, 8 or 16 serial ports
  • Serial port expansion for manufacturing floor, gas pump, Industrial Automation
  • RealPort® with encryption provides SSL-based protection
  • SSHv2 for encrypted connections
ConnectCore® 6 Single Board Computer
Connected i.MX6 Single Board Computer
  • Compact and cost-effective off-the-shelf i.MX6 SBC solution
  • Wired Ethernet and 802.11a/b/g/n plus Bluetooth 4.0 options
  • Ready for cellular and XBee RF module integration
  • Designed for flexibility with complete set of peripherals
  • Yocto Project Linux, Android, and Windows Embedded Compact support
Digi Connect® ES (Extended Safety)
Serial Server with Galvanic Isolation
  • Safety certified - IEC 60601 / EN60601 3rd edition compliant
  • Optional Integrated Ethernet switch
  • 4 or 8 electrically isolated serial ports (RS-232)
  • Python and Digi Device Cloud
Digi One® IA
Serial Server to Ethernet Enable Any Industrial Serial Device
  • Modbus serial to Modbus/TCP protocol conversion
  • TCP/UDP Socket Services for broad device connectivity
  • 1 RS-232/422/485 switch selectable serial port
  • Industrial protocol support
Rabbit® Minicore® RCM6600W Series
Ultra-Compact Wi-Fi Module
  • Rabbit® 6000 running at 162.5 MHz
  • On-board single-chip 802.11b/g transceiver & 10/100 Ethernet
  • 4 A/D inputs 12 bit resolution
  • 1 MB of SRAM and up to 4 MB of serial flash
  • Up to 32 GPIO lines and 6 serial ports
ConnectCore® i.MX53 / Wi-i.MX53
NXP/Freescale i.MX53 Cortex A8 SoM
ConnectCard™ for i.MX28
NXP/Freescale i.MX28 ARM9 SoM
  • Cost-effective design in compact form factor
  • 32-bit ARM processor at up to 454 MHz
  • Single/dual 10/100 Ethernet connectivity options
  • Pre-certified 802.11a/b/g/n Wi-Fi + Bluetooth 4.0
  • Support for Yocto Project Linux, Digi Embedded Linux, and Android
ConnectCore® 9P 9215
Highly Integrated, Network-Enabled Core Module
  • Compact, cost-efficient 150 MHz ARM9 module
  • Secure high-performance Ethernet networking
  • Common family footprint for wired and wireless modules
  • Programmable on-chip interfaces, dynamic power management
Digi Connect® Wi‑ME 9210
Intelligent Wi-Fi Module in RJ-45 Form Factor
  • Secure 802.11b/g/n connectivity
  • Industrial operating temperature
  • RJ-45 form factor compatible with Digi Connect ME
  • Support for Digi Embedded Linux and Digi NET+OS
Digi Connect ME® 9210
Intelligent Ethernet Connectivity in RJ-45 Form Factor
  • Wired 10/100 Ethernet network interface
  • Industrial operating temperature
  • RJ-45 form factor compatible with Digi Connect Wi-ME
  • Support for Digi Embedded Linux and NET+OS
Edgeport®
USB-to-Serial Converters
  • Add 1, 2, 4, 8, or 16 serial ports to a PC or thin client in minutes
  • RS-232, RS-422, or RS-485 serial ports (software selectable)
  • USB plug-n-play alternative to PCI cards
  • Galvanic isolated, industrial, compact and rugged metal models
  • Rack-mount options
ConnectCore® i.MX51 / Wi-i.MX51
NXP/Freescale i.MX51 Cortex A8 SoM
Digi Connect ME®
Secure Network Device Server Module
  • Integrated 10/100 Mbit Ethernet interface
  • Strong enterprise-grade network security
  • Common family footprint for wired and wireless modules
  • High-speed serial interface (UART)
RabbitCore® RCM3000 Series
Microprocessor Core Module
  • Rabbit 3000 microprocessor at 30 MHz
  • Up to 512K Flash/512K SRAM
  • 52 digital I/O and 6 serial ports (IrDA, HDLC, asynch, SPI)
  • 3.3V operation, low power “sleepy” modes (< 2mA)
RabbitCore® RCM3400 Series
Microprocessor Core Module
  • Rabbit 3000 microprocessor at 30 MHz
  • Up to 512K Flash/512K SRAM
  • 8 channel 12-bit A/D with programmable gain
  • 47 digital I/O and 5 serial ports (IrDA, HDLC, asynch, SPI)
RabbitCore® RCM4000 Series
Communications and Control Processor
  • Rabbit 4000 running at 59 MHz
  • Up to 1 MB (16-bit) Program Flash, 1 MB (16-bit) SRAM, and 32 MB of Flash memory
  • 10Base-T Ethernet (RJ-45 connector)
  • Up to 28 GPIO and up to 5 serial ports
  • 8 channels 12-bit A/D converter
RabbitCore® RCM3700 Series
Microprocessor Core Module
  • Up to 4 serial ports for multiple device connectivity
  • 10Base-T with optional 10/100Base-T Ethernet
  • Up to 512K Flash for code and up to 512K SRAM for data
  • 1 MB of on-board serial Flash utilizing FAT file support
RabbitCore® RCM4100 Series
Microprocessor Core Module
  • Rabbit 4000 running up to 59 MHz
  • 512K Flash, 256K / 512K Data SRAM
  • Up to 40 GPIO, up to 6 CMOS-compatible serial ports
  • Auxiliary I/O feature for reducing processor bus loading
RabbitCore® RCM4200 Series
Microprocessor Core Module
  • Rabbit 4000 running at 59 MHz
  • 10/100Base-T Ethernet, RJ-45 jack
  • 512K Flash / 512K Data SRAM
  • 4 MB or 8 MB Serial Flash for data storage
RabbitCore® RCM3100 Series
Microprocessor Core Module
  • Rabbit 3000 microprocessor at 30 MHz
  • Up to 512K Flash/512K SRAM
  • 54 digital I/O and 6 serial ports (IrDA, HDLC, asynch, SPI)
  • 3.3V operation, low power “sleepy” modes (< 2mA)
Digi Utility Communication Hub with 4G LTE
Gateway for Distribution Automation
  • Software-defined multicarrier 4G LTE 
  • Enterprise routing for encryption, logging, and security features
  • 2 Ethernet ports and software selectable RS-485
  • Rugged IP66 enclosure protects from the elements
  • Din rail and power support 3rd party equipment 
Digi Neo®
Low Profile Serial Cards
  • PCI Express 1x slot
  • 4/8 PCIe RS-232 serial port options
  • Low latency/Surge suppression
  • Low Profile cards
  • Up to 921.6 Kbps
Digi XBee Smart Plug™ ZigBee
ZigBee® Energy Manager
  • Intelligent wireless energy management device
  • Network extender adds distance to ZigBee networks and increases signal strength
  • Creates additional network pathways to ensure more reliable mesh network
  • Small form factor plugs into standard power outlets, secure mounting tab prevents accidental unplugging
XBee® Sensors
Real-Time Environmental Data Using ZigBee® Networks
  • Compact, battery powered sensors with integrated ZigBee®
  • Real-time temperature, humidity and light information
  • Easy installation and configuration for rapid deployment
  • Long battery life for reliable operation
  • Small size for unobtrusive installation
Rabbit® SBC LP3500 Series
Single-Board Computer
  • Low power consumption less than 100 uA in power save mode
  • 8 A/D inputs with 12 bit resolution
  • Digital outputs can sink up to 200 mA
  • 6 serial ports for multiple device connectivity
  • 16 protected digital inputs
XBee® DigiMesh®/Multi-Point Adapters
900 MHz and 2.4 GHz Wireless Adapters
  • Simple topology to deploy and grow
  • Self-healing and discovery for network stability
  • Sleeping routers supported for long battery life
  • No master/coordinator required
  • Compatible with ConnectPort X gateways and other devices using DigiMesh
Rabbit® OP7200 eDisplay
Ethernet-Intelligent Operator Interface
  • Rabbit® 2000 microprocessor at 22 MHz
  • ¼ VGA display (320 x 240 pixels)
  • 10Base-T Ethernet, RJ-45
  • 256K Flash/128K SRAM
  • 24-27 industrialized I/O and 4 CMOS-compatible serial ports
Rabbit® SBC BL2600 Series
Ethernet-Enabled Single-Board Computer
  • Rabbit® 3000 microprocessor at 44 MHz
  • 10/100Base-T Ethernet, RJ-45
  • 512K Flash/512K SRAM
  • 36 digital I/O (configurations include protected digital inputs, sinking/sourcing outputs, high current outputs)
  • 12 analog channels: eight 11-bit A/D, four 12-bit D/A buffered outputs
XBee-PRO® 868
Long-Range RF Module for Europe
  • EOL in Progress – Product is not for new design. Please refer to XBee RF Modules for our latest products.
  • 868 MHz short-range device G3 band for Europe
  • No configuration needed for out-of-the-box RF communications
  • Common XBee® footprint for a variety of RF modules
  • Outdoor RF line-of-sight range up to 80 km
  • Simple to use peer-to-peer or point-to-multipoint topology

Recently Viewed

Contact a Digi expert and get started today! Contact Us