Range

Wired Protocol

Connector

Wireless Interfaces

Frequency

Security

Family

Industry: Energy

Industry: Industrial

Industry: Medical

Industry: Smart Cities

Industry: Retail

Industry: Transportation

Cellular

Ethernet

Authentication

Display/Video

Internet Protocol

Form factor

Mounting

Operating Temperature

OS Support

PCI interface

Power

Processor

Programming Language

Protocols

Serial Ports

Software Support

USB Ports

USB Version

Products

34 results
Switch view
ConnectCore® for i.MX6UL
The Industry’s smallest wireless low-power NXP i.MX6UL System-on-Module platform to build your intelligent and secure connected devices
  • Stamp-sized, secure, connected System-on-Module platform
  • NXP i.MX6UL-2, Cortex-A7 @ 528 MHz
  • Up to 2 GB NAND flash, up to 1 GB DDR3
  • Patent-pending low-profile Digi SMTplus™ form factor
  • Integrated Microcontroller Assist™ for 30 µA ultra-low power modes
  • Pre-certified 802.11a/b/g/n/ac + Bluetooth 4.2 option
  • Integrated dual 10/100 Ethernet connectivity
  • Exclusive Digi TrustFence™ embedded device security framework
  • Turnkey and royalty-free embedded Linux software platform
  • Industrial operating temperature and reliability
Digi XLR PRO® Module
1-Watt 900 MHz RF module features best-in-class range and interference immunity to enable data communications even in the noisiest RF environments.
  • Patented Punch2 Technology enables industry leading interference immunity and receive sensitivity of -120 dBm
  • Adjustable output power up to 1-Watt achieves exceptional range with high gain antenna
  • 128-bit AES encryption for secure data communications
  • Fully certified for use in unlicensed 900 MHz band
  • Up to 3.2 Mb/s for higher bandwidth applications
Digi XBee® Cellular
Digi XBee Cellular LTE Cat 1 embedded modems provide OEMs with a simple way to integrate cellular connectivity into their devices
  • Industry’s fastest path to embedded cellular connectivity
  • Smallest end-device certified embedded cellular modem on the market
  • FCC pre-certified and Verizon end-device certified
  • Authentic 20-pin Digi XBee through-hole form factor
  • Standard Digi XBee AT and API interfaces
  • 3.3 V power for battery-powered applications
  • OTA firmware updates
  • SSL/TLS for secure communications
  • Configure locally with XCTU or remotely with Digi Remote Manager®
Digi XBee® ZigBee
Embedded ZigBee and Thread-ready RF modules provide OEMs with a simple way to integrate mesh technology into their application
  • Programmable versions with on-board microprocessor enable custom ZigBee application development
  • Through-Hole and Surface Mount form factors enable flexible design options
  • Link budgets of 110 dB for XBee and 119 dB for XBee-PRO
  • Industry-leading sleep current
  • Firmware upgrades via UART, SPI or over the air (OTA)
  • Thread updatable on the S2D EM3587 variant for maximum flexibility
ConnectCore® 6
NXP/Freescale i.MX6 Cortex A9 SoM
  • Scalable Cortex-A9 multi-core performance
  • Microcontroller Assist™ option on module
  • Cost-effective, reliable, low-profile surface-mount form factor
  • Pre-certified 802.11a/b/g/n and Bluetooth 4.0 connectivity
  • Designed for reliability and long-term availability
  • Linux, Android and Windows Embedded support
Digi XBee-PRO® 900HP
Long Range 900 MHz OEM RF Module
  • Superior LOS range of up to 28 miles with high-gain antenna
  • Simplified AT command set and advanced XBee API 
  • Over-the-air firmware updates
  • Software-selectable channel mask for interference immunity
  • Advanced sleep modes: sleeping routers, pin sleep, cyclic sleep
  • Try these modules out with a XBee-PRO 900HP DigiMesh Kit
Digi XBee® 802.15.4
Low-cost, easy-to-deploy RF modules provide critical end-point connectivity to devices and sensors
  • Simple, out-of-the-box RF communications, no configuration needed
  • Point-to-multipoint network topology
  • 2.4 GHz for worldwide deployment
  • Common XBee footprint for a variety of RF modules
  • Industry leading sleep current of sub 1uA
  • Firmware upgrades via UART, SPI or over the air
  • Migratable to DigiMesh and ZigBee PRO protocols and vice-versa
Digi XBee® DigiMesh® 2.4
Wireless Mesh Networking RF Module
  • Dynamic peer-to-peer DigiMesh protocol
  • No configuration needed for out-of-the-box RF communications
  • 2.4 GHz globally deployable frequency
  • Self-healing and discovery for network stability
ConnectCore® 6 Single Board Computer
Connected i.MX6 Single Board Computer
  • Compact and cost-effective off-the-shelf i.MX6 SBC solution
  • Wired Ethernet and 802.11a/b/g/n plus Bluetooth 4.0 options
  • Ready for cellular and XBee RF module integration
  • Designed for flexibility with complete set of peripherals
  • Yocto Project Linux, Android, and Windows Embedded Compact support
Rabbit® Minicore® RCM6600W Series
Ultra-Compact Wi-Fi Module
  • Rabbit® 6000 running at 162.5 MHz
  • On-board single-chip 802.11b/g transceiver & 10/100 Ethernet
  • 4 A/D inputs 12 bit resolution
  • 1 MB of SRAM and up to 4 MB of serial flash
  • Up to 32 GPIO lines and 6 serial ports
Rabbit® MiniCore® RCM6700 Series
Embedded Device Servers
  • Rabbit® 6000 running up to 200 MHz
  • 10/100 Ethernet and pin-compatible with MiniCore 802.11b/g wireless modules
  • 1 MB of internal RAM for program storage
  • Up to 4 MB of serial Flash for data logging or web page storage
ConnectCore® i.MX53 / Wi-i.MX53
NXP/Freescale i.MX53 Cortex A8 SoM
ConnectCard™ for i.MX28
NXP/Freescale i.MX28 ARM9 SoM
  • Cost-effective design in compact form factor
  • 32-bit ARM processor at up to 454 MHz
  • Single/dual 10/100 Ethernet connectivity options
  • Pre-certified 802.11a/b/g/n Wi-Fi + Bluetooth 4.0
  • Support for Yocto Project Linux, Digi Embedded Linux, and Android
ConnectCore® 9P 9215
Highly Integrated, Network-Enabled Core Module
  • Compact, cost-efficient 150 MHz ARM9 module
  • Secure high-performance Ethernet networking
  • Common family footprint for wired and wireless modules
  • Programmable on-chip interfaces, dynamic power management
Digi Connect® Wi‑ME 9210
Intelligent Wi-Fi Module in RJ-45 Form Factor
  • Secure 802.11b/g/n connectivity
  • Industrial operating temperature
  • RJ-45 form factor compatible with Digi Connect ME
  • Support for Digi Embedded Linux and Digi NET+OS
Digi Connect ME® 9210
Intelligent Ethernet Connectivity in RJ-45 Form Factor
  • Wired 10/100 Ethernet network interface
  • Industrial operating temperature
  • RJ-45 form factor compatible with Digi Connect Wi-ME
  • Support for Digi Embedded Linux and NET+OS
ConnectCore® i.MX51 / Wi-i.MX51
NXP/Freescale i.MX51 Cortex A8 SoM
Rabbit® MiniCore® RCM5700 Series
Ultra-Compact Serial to Ethernet Module
  • 10/100Base-T Ethernet
  • Up to 640 KB SRAM for data, 1 MB flash memory for program storage and 2 MB serial flash for mass storage
  • Up to 32 GPIO lines and 6 serial ports
  • Serial to Ethernet bridge
  • Secure, anywhere management using Device Cloud
RabbitCore® RCM3000 Series
Microprocessor Core Module
  • Rabbit 3000 microprocessor at 30 MHz
  • Up to 512K Flash/512K SRAM
  • 52 digital I/O and 6 serial ports (IrDA, HDLC, asynch, SPI)
  • 3.3V operation, low power “sleepy” modes (< 2mA)
RabbitCore® RCM3209 Series
Microprocessor Core Module
  • Rabbit 3000 microprocessor at 44 MHz
  • Optional 10/100Base-T Ethernet
  • 512K Flash / 256K SRAM / 512K Program Execution SRAM
  • 52 digital I/O and 6 serial ports for multiple connectivity options
RabbitCore® RCM3400 Series
Microprocessor Core Module
  • Rabbit 3000 microprocessor at 30 MHz
  • Up to 512K Flash/512K SRAM
  • 8 channel 12-bit A/D with programmable gain
  • 47 digital I/O and 5 serial ports (IrDA, HDLC, asynch, SPI)
RabbitCore® RCM3900 Series
Microprocessor Core Module
  • Rabbit® 3000 microprocessor at 44 MHz
  • Extended operating temperature range: -20° C to +80° C
  • 10/100Base-T Ethernet
  • Up to 1 GB microSD hot-swappable storage
RabbitCore® RCM5400W Series
Microprocessor Core Module
  • Rabbit 5000 running at 74 MHz
  • Up to 2 MB of serial flash for data intensive applications utilizing FAT file system
  • 39 digital I/O lines and up to 6 serial ports
  • Integrated IEEE 802.11b/g Wi-Fi
RabbitCore® RCM4000 Series
Communications and Control Processor
  • Rabbit 4000 running at 59 MHz
  • Up to 1 MB (16-bit) Program Flash, 1 MB (16-bit) SRAM, and 32 MB of Flash memory
  • 10Base-T Ethernet (RJ-45 connector)
  • Up to 28 GPIO and up to 5 serial ports
  • 8 channels 12-bit A/D converter
RabbitCore® RCM4300 Series
Microprocessor Core Module
  • Rabbit 4000 running at 58.98 MHz
  • Supports up to 2 GB microSD memory card, 1 MB SRAM for shared code, 512K of battery-backed SRAM, FAT file organization
  • 10/100Base-T Ethernet, 36 GPIO, 6 serial ports
  • 8 channel 12-bit resolution (RCM4300 only)
  • Embedded web server
RabbitCore® RCM3700 Series
Microprocessor Core Module
  • Up to 4 serial ports for multiple device connectivity
  • 10Base-T with optional 10/100Base-T Ethernet
  • Up to 512K Flash for code and up to 512K SRAM for data
  • 1 MB of on-board serial Flash utilizing FAT file support
RabbitCore® RCM4100 Series
Microprocessor Core Module
  • Rabbit 4000 running up to 59 MHz
  • 512K Flash, 256K / 512K Data SRAM
  • Up to 40 GPIO, up to 6 CMOS-compatible serial ports
  • Auxiliary I/O feature for reducing processor bus loading
RabbitCore® RCM3600 Series
Microprocessor Core Module
  • Rabbit 3000 microprocessor at 22 MHz
  • Up to 512K Flash/512K SRAM
  • 33 parallel digital I/O with configurable options
  • 4 serial ports (IrDA, HDLC, async, SPI)
RabbitCore® RCM4200 Series
Microprocessor Core Module
  • Rabbit 4000 running at 59 MHz
  • 10/100Base-T Ethernet, RJ-45 jack
  • 512K Flash / 512K Data SRAM
  • 4 MB or 8 MB Serial Flash for data storage
RabbitCore® RCM3100 Series
Microprocessor Core Module
  • Rabbit 3000 microprocessor at 30 MHz
  • Up to 512K Flash/512K SRAM
  • 54 digital I/O and 6 serial ports (IrDA, HDLC, asynch, SPI)
  • 3.3V operation, low power “sleepy” modes (< 2mA)
Rabbit® SBC BL4S200 Series
Single-Board Computer
  • Uses Rabbit® 4000 and Rabbit 5000 microprocessors
  • Choice of Wi-Fi or Ethernet connectivity
  • 40 digital I/O and up to 5 serial ports
  • 8 input and 2 output analog channels
  • Advanced I/O subsystem is software configurable reducing the load on the processor
Rabbit® OP7200 eDisplay
Ethernet-Intelligent Operator Interface
  • Rabbit® 2000 microprocessor at 22 MHz
  • ¼ VGA display (320 x 240 pixels)
  • 10Base-T Ethernet, RJ-45
  • 256K Flash/128K SRAM
  • 24-27 industrialized I/O and 4 CMOS-compatible serial ports
Rabbit® SBC BL2600 Series
Ethernet-Enabled Single-Board Computer
  • Rabbit® 3000 microprocessor at 44 MHz
  • 10/100Base-T Ethernet, RJ-45
  • 512K Flash/512K SRAM
  • 36 digital I/O (configurations include protected digital inputs, sinking/sourcing outputs, high current outputs)
  • 12 analog channels: eight 11-bit A/D, four 12-bit D/A buffered outputs
Digi XBee® Wi-Fi
OEM Module with Fully Integrated Support for Digi Device Cloud
  • Build cloud-connected Wi-Fi prototypes in under an hour
  • Popular XBee Through-Hole and Surface-Mount footprints
  • Ideal for Industrial Applications that require fast time to market
  • Easily connect to a smartphone or tablet for configuration or data transfer
  • 802.11b/g/n provides up to 72 Mbps data rate

Recently Viewed

Contact a Digi expert and get started today! Contact Us