AnywhereUSB/5 (first generation) components

 

Item Name Description
1 System Status LED On initial power-up, the System Status LED is orange for two seconds while the system initializes and then blinks slow green. If you have enabled DHCP d and the device is booting up, the System Status LED is orange while the AnywhereUSB searches for a DHCP server. If it cannot find a DHCP server, it returns to the default configuration to allow the Configuration Utility to assign a static IP address. If the System Status remains red for an extended period of time, contact Digi Technical Support.
2 USB LEDs

Five USB LEDs; note the following LED patterns:

  • Green hunting pattern across all 5 USB LEDs: Not connected to a host computer.
  • Orange alternating on ports 1-3-5 and 2-4: Updating image in Flash. Do not remove power from AnywhereUSB while flash is being updated. Doing so damages your AnywhereUSB.
  • Solid green: The USB ports are connected to a host computer.
  • Green over red hunting pattern: Contact Digi Technical Support.
3 Power connector

Use the included power adapter.

Note The first generation AWUSB/5 uses a center-negative power supply which is different than the newer AWUSB/5 (G2) and AWUSB/5 M devices. Power-supplies are NOT interchangeable; use only the power supply that is provided with the device.
4 Ethernet connector The left Ethernet LED is green when connected to a network and the right Ethernet LED blinks orange when there is data transmission activity on the port. Use a standard Ethernet cable.
5 USB ports Five USB ports to connect USB devices.