Configure web filtering with Cisco Umbrella

Required configuration items

Task one: Generate a Cisco Umbrella API token

  1. Log into the Cisco Umbrella Dashboard (https://dashboard.umbrella.com).
  2. On the menu, select Admin > API Keys.

    The API Keys page displays.

  3. Click (Create).
  4. Select Legacy Network Devices.
  5. Click Create.
  6. Copy the token.

Task two: Configure web filtering


  1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access rights.
  2. Access the device configuration:

    1. Locate your device as described in Use Digi Remote Manager to view and manage your device.
    2. Click the Device ID.
    3. Click Settings.
    4. Click to expand Config.

    1. On the menu, click System. Under Configuration, click Device Configuration.

      The Configuration window is displayed.

  3. Click Firewall > Web filtering service.

  4. Click Enable web filtering to enable.
  5. For Web filtering service, select Cisco Umbrella.
  6. Paste the API token that was generated in Task one: Generate a Cisco Umbrella API token.
  7. Click Apply to save the configuration and apply the change.
  1. Select the device in Remote Manager and click Actions > Open Console, or log into the TX64 local command line as a user with full Admin access rights.

    Depending on your device configuration, you may be presented with an Access selection menu. Type admin to access the Admin CLI.

  2. At the command line, type config to enter configuration mode:
    > config
(config)>
  3. Enable web filtering:
    (config)> firewall web-filter enable true
(config)>
  4. Set the web filter service type to umbrella:
    (config)> firewall web-filter service umbrella
(config)>
  5. Set umbrella_token to the API token generated in Task one: Generate a Cisco Umbrella API token:
    (config)> firewall web-filter umbrella_token token
(config)>
  6. Save the configuration and apply the change
    (config)> save
Configuration saved.
>
  7. Type exit to exit the Admin CLI.

    Depending on your device configuration, you may be presented with an Access selection menu. Type quit to disconnect from the device.