Step 6: Connect the Hub to the network using Wi-Fi

You can use a Wi-Fi connection to connect the Hub to your network. This enables you to access the Hub's web UI and configure the Hub.

In some situations, connecting the Hub to your network using an Ethernet LAN connection will have better performance than connecting over Wi-Fi. For information on setting up an Ethernet LAN connection, see Step 5: Connect to the Hub using an Ethernet LAN connection.

Note Only AnywhereUSB 8 Plus with Wi-Fi and AnywhereUSB 24 Plus with Wi-Fi models are able to connect to the network using Wi-Fi.

Follow this process to connect to Wi-Fi:

1. Connect Wi-Fi antennas to the Hub

2. Enable Wi-Fi

3. Configure the Hub as a Wi-Fi client or access point

 

NEXT STEP: If you are connecting the Hub to the network using Wi-Fi, proceed to the next step: Connect Wi-Fi antennas to the Hub.

NEXT STEP: If your model does not have Wi-Fi, proceed to the next step: Step 7: Verify initial connection.