You can interact with your device’s system as a remote console through the Digi Remote Manager WebUI. Follow these steps to use the remote command line interface tool:
-
Log in to your Remote Manager account (https://remotemanager.digi.com).
-
Go to the Device Management tab and select Devices.
-
Double click your device. The device page loads.
-
Go to the Console tab on the top menu.
By default, the tool starts a new command line interface session that requires an authentication step.
Once logged in, you can operate a remote console in the target.
| The Digi Remote Manager command line interface uses Privileged Access Management (PAM) to grant access. |
