Home/Support/Support Forum/XBIB-U drivers

XBIB-U drivers

0 votes
I couldn't find the XBIB-U USB drivers on the CDROM included with the starter kit. Maybe it was left off?

Also had a hard time finding any direct link to it under the support section of the website.

Thru trial and error, finally found them at http://ftp1.digi.com/support/images/PKG-U_windows_drivers.zip
asked Dec 14, 2007 in USB and Ethernet drivers by cwhittenburg New to the Community (2 points)

Please log in or register to answer this question.

4 Answers

0 votes
If you are looking for drivers for Vista (32 bit), you can contact Digi tech support. They do have the Vista drivers, but these are not certified by Microsoft.
answered Jul 1, 2009 by Rocker1446 Seasoned Professional (227 points)
0 votes
You can download the USB drivers for the board in question by going to
http://www.digi.com/support/forum/viewthread_thread,938#3579
answered Jul 1, 2009 by mvut Veteran of the Digi Community (12,001 points)
0 votes
Hi,

I had the same problem, you could try to download the drivers from here: http://ftp1.digi.com/support/driver/40002636_A.zip

This are the drivers for the XBIB-U that are for windows XP, but they work well on vista home premium(32-bits), also to fin new drivers you should try to look on the support tag, then select the product X-CTU, because you could use the XBIB-U to work with the X-CTU and to do that you need the usd drivers
answered Jul 5, 2009 by darkdragon1983 New to the Community (1 point)
0 votes
For my sake (since I know I'll come back here looking for this answer again...) and for anyone else that has had trouble installing these drivers on XP, here is a handy note: Plug in the device after downloading the drivers and then use the new hardware wizard to find those downloaded drivers and install them. You have to let this process happen twice because there are technically 2 drivers (one for the board itself and one for the custom USB port setup).
answered Oct 13, 2011 by milkweed857 New to the Community (1 point)
...