Home/Support/Support Forum/Digi Wi-Me JTAG
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Digi Wi-Me JTAG

0 votes
Hi, I've a problem whit this device.
When launch a debug with a Digi ESP program, the device not received an IP and isn't connected. With serial console a try to change the parms but nothing. The parms I think are correct...
I try with "FTP Server File Sistem Sample" but nothing.

This is report of serial:
NET+OS Version 7.1
Copyright (c) 1997-2007, Digi International, Inc.

PLATFORM: connectwime_esp
APPLICATION: LGL Connect
NETWORK INTERFACE PARAMETERS:
Wireless IP address is 169.254.0.1
Wireless subnet mask is 255.255.0.0
Wireless IP address of default gateway to other networks is 169.254.0.100
Wireless protocol mode is for peer-to-peer (ad hoc) networks only)
Wireless SSID is Connect
Wireless channel is 13
Wireless transmit rate is 11
Wireless transmit power is 15dbm
Wireless multi domain capability (802.11d) disabled
Authentication type = Open System
HARDWARE PARAMETERS:
Serial channels will use a baud rate of 9600
This board's serial number is N99999999
This board's Wireless MAC Address is 00:40:9D:2E:C9:A8
After board is reset, start-up code will wait 5 seconds
Press any key in 5 seconds to change these settings.

The device doesn't start

Thanks
Bye
Walter
asked Mar 25, 2010 in NET+OS by waltercuter New to the Community (2 points)
recategorized Dec 10, 2013 by tuxembb

Please log in or register to answer this question.

3 Answers

0 votes
I haven't used the WIME but from basic WIFI I say take a look at your channel and protocol.

Are you trying to be a server or a client?
answered Mar 25, 2010 by egawtry Veteran of the Digi Community (349 points)
0 votes
I thanks... I try but nothing... I think the problem is due to the fact that, using Java, I tried changing the WEP key but I probably have the wrong code. I thought that, with the JTAG as the FLASH is erased, there are not a problem... but my Digi don't connected...
answered Mar 25, 2010 by waltercuter New to the Community (2 points)
0 votes
Hy,
I find a solution... I've a NET+OS File Corrupted.

Bye
answered Mar 31, 2010 by waltercuter New to the Community (2 points)
...