Home/Support/Support Forum/CM32 and AIRO.O driver
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

CM32 and AIRO.O driver

0 votes
Hello,

I have a Digi CM32 and want to use one of the supported cards on it's compatibility list , a Cisco AIRONET 340 series.

I found it interesting that it would not detect it, so playing with the box I found this in the log.

Starting PCMCIA services: cardmgr.
cardmgr[55]: starting, version is 3.1.24
cardmgr[55]: watching 1 sockets
cardmgr[55]: initializing socket 0
cardmgr[55]: socket 0: Aironet PC4800
cardmgr[55]: module /lib/modules/2.4.2_hhl20/pcmcia/airo.o not available
cardmgr[55]: executing: 'modprobe airo'
Configuring Ethernet Mode: done.
Configuring network interfaces: cardmgr[55]: + insmod: airo.o: no module by that name found
cardmgr[55]: modprobe exited with status 1
cardmgr[55]: module /lib/modules/2.4.2_hhl20/pcmcia/airo_cs.o not available
cardmgr[55]: executing: 'modprobe airo_cs'
cardmgr[55]: + insmod: airo_cs.o: no module by that name found
cardmgr[55]: modprobe exited with status 1
eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
done.

So, this means it's detecting the card but does not have a module/driver for it.

I've found the 80007071_E on the site and it contains the driver.tar file with the AIRO.O file?!

How do I load this to the CM32 console?

Thanks!

http://ftp1.digi.com/support/utilities/80007071_E.tar.gz
asked Apr 10, 2012 in Console Servers by JeanM New to the Community (1 point)

Please log in or register to answer this question.

1 Answer

0 votes
Used WinSCP and it's now loading the airo.o file.

Still need some work...only supports WEP?
answered Apr 10, 2012 by JeanM New to the Community (1 point)
...