Home/Support/Support Forum/Connection PortServer with Modem
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Connection PortServer with Modem

0 votes
Hello. I have DiGi PortServer TS8. I connect it with modem US Robotics by Cisco black cable. When i try to connect to portserver by dial-up, the connection is UP, but i not seen response from portserver on my hiperterminal. :( How to make this connection?
asked Mar 31, 2005 in Portserver TS by sh_ New to the Community (0 points)

Please log in or register to answer this question.

1 Answer

0 votes
you need to set port server to hardware control and profile to modem i use the port server on tcpip and telnet to modem using connect 01 from command prompt
in hyper terminal depending on cable you may need null modem adapter. I use 10 pin to db 9 and don't need null adapter. If I connect pc to port then i use null modem adapter. Hope this helps
answered Mar 27, 2017 by darrellstephens57 New to the Community (1 point)