Home/Support/Support Forum/Access to Portserver II
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Access to Portserver II

0 votes
I wanted to know how to reset my Portserver configurations to the defaults. The Portserver is not seeing the network and all the ports are set to telnet directly to another server. I therefore need to reset the port settings so that I can login to the portserver itself to troubleshoot.
asked Nov 3, 2004 in Portserver TS by Yus New to the Community (0 points)

Please log in or register to answer this question.

2 Answers

0 votes
There are a step by step instructions in chapter 15 of the Configuration and Administration Guide
http://ftp1.digi.com/support/documentation/9200271b.pdf
answered Nov 3, 2004 by shatman Community Contributor (81 points)
0 votes
Power off the Porserver II. Hold down the two arrow buttons while powering on the Portserver II. Continue to hold the arrow buttons down until the display reads 'AC'. Release the arrow buttons and the unit will be at its default setting.
answered Mar 28, 2005 by nbrown New to the Community (2 points)
...