Home/Support/Support Forum/Initilization string for FaxMan
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Initilization string for FaxMan

0 votes
What modem init string do I need for the Acceleport Ras
to get it to work with FaxMAN?
asked Nov 26, 2003 in Serial Cards by Guest1 New to the Community (1 point)

Please log in or register to answer this question.

1 Answer

0 votes
You need to enable Hardware/Software flow control for our Acceleport RAS series multi modem cards, you need to pass '&K6' in our init string.

We start with our default init string:
AT&FE0V1&C1&D2S0=0

Now we add '&K6':
AT&FE0V1&K6&C1&D2S0=0

For FaxMan Jr., we need to set the control's DeviceInit Property:
FaxManJr1.DeviceInit="AT&FE0V1&K6&C1&D2S0=0"

For the FaxMan SDK, we can set the init string either in code (FaxMan1.DeviceInit="AT&FE0V1&K6&C1&D2S0=0") or via Faxman's FM3032.ini file.

[Port1]
Send=1
Receive=0
Class1=0
Class2=1
Class20=1
Init=AT&FE0V1&K6&C1&D2S0=0
Reset=AT
answered Nov 26, 2003 by Rasman New to the Community (20 points)
...